Sorry Waz, I've been a little lax!
Update coming through shortly for that last couple of days!
Sent from my SM-G930F using Tapatalk
Printable View
Day 7: Part 1
First cab off the ranks today, scraping back the excess glue around the bindingshttps://uploads.tapatalk-cdn.com/201...22cabd7fc2.jpg
https://uploads.tapatalk-cdn.com/201...063f9207e8.jpg
https://uploads.tapatalk-cdn.com/201...938e4bf8f5.jpg
https://uploads.tapatalk-cdn.com/201...4196895549.jpg
https://uploads.tapatalk-cdn.com/201...052e0295aa.jpg
Laminating the headstock veneer in place, more Aussie Blackwood
https://uploads.tapatalk-cdn.com/201...184a4e1600.jpg
Sent from my SM-G930F using Tapatalk
Day 7: Part 2
Sanding flush the end wedge. You can see parts of the binding that haven't been touched yet.
https://uploads.tapatalk-cdn.com/201...18ba51f4ba.jpg
Starting to look fresh!
https://uploads.tapatalk-cdn.com/201...9a294c08c2.jpg
Into the neck jig
https://uploads.tapatalk-cdn.com/201...da194d40e3.jpg
https://uploads.tapatalk-cdn.com/201...405dccf695.jpg
https://uploads.tapatalk-cdn.com/201...27a4492e3f.jpg
https://uploads.tapatalk-cdn.com/201...5043791ce8.jpg
Sent from my SM-G930F using Tapatalk
Day 7: Part 3
Starting to look like a guitar!
https://uploads.tapatalk-cdn.com/201...680bdd1a0a.jpg
Fine tuning the neck joint
https://uploads.tapatalk-cdn.com/201...1ef176ec7e.jpg
Little tease of the fret board
https://uploads.tapatalk-cdn.com/201...4d964591ab.jpg
Shaping of the neck
https://uploads.tapatalk-cdn.com/201...f7b4d2f1b4.jpg
https://uploads.tapatalk-cdn.com/201...2cbdb59b79.jpg
And fretting the fret board
https://uploads.tapatalk-cdn.com/201...ac5508cb66.jpg
Sent from my SM-G930F using Tapatalk
Day 8: Part 1
Fret board completely fretted
https://uploads.tapatalk-cdn.com/201...e24181e0c5.jpg
Partial neck shaping also done
https://uploads.tapatalk-cdn.com/201...6e301906cd.jpg
https://uploads.tapatalk-cdn.com/201...38c7dbe280.jpg
Starting to introduce a volute into the design
https://uploads.tapatalk-cdn.com/201...9c39bf6869.jpg
Headstock shaping
https://uploads.tapatalk-cdn.com/201...227a319b32.jpg
And patching up some areas around the binding
https://uploads.tapatalk-cdn.com/201...87c6371575.jpg
Sent from my SM-G930F using Tapatalk
Day 8: Part 2
Neck heel cap roughed out
https://uploads.tapatalk-cdn.com/201...358e25eb94.jpg
And glued on
https://uploads.tapatalk-cdn.com/201...2f2034c9d0.jpg
Side markers installed. These are just plastic rods
https://uploads.tapatalk-cdn.com/201...052a348fc0.jpg
Start preparing the bridge blank
https://uploads.tapatalk-cdn.com/201...985198127a.jpg
More shaping to come
https://uploads.tapatalk-cdn.com/201...2b8e613b32.jpg
And finally, the neck is glued on!!
https://uploads.tapatalk-cdn.com/201...d1f12a66d9.jpg
I have a couple of things to fix up tomorrow, but if all goes well, I should have the fret board and bridge glued on tomorrow!! Fingers crossed!
Sent from my SM-G930F using Tapatalk
Don't stop there, I'm dribbling all over my desk and want to see the photos all of the way to the end TONIGHT !!! :-)
Well, unless you've got a crystal ball, I can't help you much there!![emoji23][emoji23]
How about a photo of Greg's guitar, he'll be applying Finish tomorrow if all goes well for him!
He's a builder of other stringed instruments like cigar box guitars and bazooki's (I think that's how you spell it) who wanted to have a crack at building a full sized guitar.
https://uploads.tapatalk-cdn.com/201...709fbd17a6.jpg
It's also an OM sized guitar with spalted blackwood back and sides, Silver Quandong top, but he's gone with hairy oak for the fretboard and bridge, and I believe he's used either Cooba or East Indian Rosewood for the headstock.
Sent from my SM-G930F using Tapatalk
Would have to see it in real life to decide if I like or dislike the "hairy oak for the fretboard and bridge", strange look from the photo.
The dark headstock looks out of place with the other lighter woods.
Day 9: Part 1
Big day, lots of little things coming together.
Shaped the tail of the Fret board. Keeping it simple. Matches the Headstock shape
https://uploads.tapatalk-cdn.com/201...4d2795c03c.jpg
Inserting the truss rod
https://uploads.tapatalk-cdn.com/201...f065948b36.jpg
A little sikaflex to hold it in place and prevent vibrations
https://uploads.tapatalk-cdn.com/201...c9ac0d0d75.jpg
Fret board glued on
https://uploads.tapatalk-cdn.com/201...9e41c4d7b2.jpg
Taped down some sandpaper in the approximate area of the bridge location and started sanding the bottom of the bridge to match the radius of the tophttps://uploads.tapatalk-cdn.com/201...1a95bfb96f.jpg
You can see the slightly darker patches at the tips is where it hasn't touched the sandpaper yet. Almost there https://uploads.tapatalk-cdn.com/201...b02dfe120e.jpg
Sent from my SM-G930F using Tapatalk
Day 9: Part 2
Jumped over to the bobbin sander and roughed out the bridge shape. Maybe a little chunky, but I'm happy with it https://uploads.tapatalk-cdn.com/201...5797d7daef.jpg
Hand sanded through 80, 120, 240, 320, 400 and finally 1200grit. No polish involved, or even wet sanded, this shine is purely from the dry sandpaper!https://uploads.tapatalk-cdn.com/201...44d64c315e.jpg
https://uploads.tapatalk-cdn.com/201...25eb9b116a.jpg
More sanding!
https://uploads.tapatalk-cdn.com/201...3e6710f858.jpg
https://uploads.tapatalk-cdn.com/201...48f0742d3e.jpg
Yep, happy with how that's looking!
https://uploads.tapatalk-cdn.com/201...bb227e56ed.jpg
Sent from my SM-G930F using Tapatalk
Day 9: Part 3
Heel cap sanded flush. Didn't actually intend it, but it's so thin at the front edge, the grain lines almost match up perfectly with the neck heel grain
https://uploads.tapatalk-cdn.com/201...4fab6bb2ab.jpg
More detailed sanding now
https://uploads.tapatalk-cdn.com/201...f4e1ef44eb.jpg
Routing the bridge saddle slot
https://uploads.tapatalk-cdn.com/201...3ea17c875b.jpg
Getting ready to place it
https://uploads.tapatalk-cdn.com/201...033cc0b863.jpg
The tape acts as a dam for the glue, and helps locate it.
https://uploads.tapatalk-cdn.com/201...8886d735d8.jpg
Done!
https://uploads.tapatalk-cdn.com/201...94d0d36b77.jpg
Tomorrow will be final sanding, maybe a couple of areas to fill with some sawdust before applying the first coats of lacquer!!
Bring on the glamour shots!!
Sent from my SM-G930F using Tapatalk
This is looking so good Zand, what was your level of wood working skills before you started?
Also wondering if they use Titebond for all the gluing too?
Apart from the small amount of work I did on the LP kit first last year, I haven't really done much wood working since leaving high school in 1990! I'm confident with wood, just don't let me anywhere near a welder!!
Aaron has such a great attitude, and his teaching style is tailored to what you want to learn. You want to know specific stuff, he's your man, he'll share pretty much any detail.
Sent from my SM-G930F using Tapatalk
Yep, titebond original for everything except when using plastic binding which it won't work with. Then he uses super glue. I decided to use the super glue on my wooden binding as well. Super thin super glue is also used in the rosettes occasionally.
Sent from my SM-G930F using Tapatalk
That looka amazimg what an experience
This is such a blast to follow Zandit - it looks amazing
This is great. I’m really enjoying following along.
Superb work. Are you making your own bridge pins?
Been away and just catching up, looks amazing. You must be really chuffed. :)
As a responsible Pit Bull Forum member you should post hourly reports with photos from now until your plane lands in Tasmania!
Day 10: Part 1
Ok, you kiddies are in for a treat!!
Finished up the final sand, so pleased with how this cutaway cleaned up
https://uploads.tapatalk-cdn.com/201...5b7b2557d5.jpg
https://uploads.tapatalk-cdn.com/201...933b2e5767.jpg
https://uploads.tapatalk-cdn.com/201...0bbf8dd2ed.jpg
One final check before I hands it over to Aaron for inspection
https://uploads.tapatalk-cdn.com/201...4ee0c82804.jpg
Then he runs the orbital sander over it
https://uploads.tapatalk-cdn.com/201...90e230e115.jpg
And then it's magic time!!
http://youtu.be/pYDUsK8fLZQ
Sent from my SM-G930F using Tapatalk
Day 10: Part 2
So in love with this timber!!
https://uploads.tapatalk-cdn.com/201...63bf0ed124.jpg
After 2 coats, I knocked it back with some very light sanding at 400grit, then applied 2 more coats, another knock back, and one final coat
https://uploads.tapatalk-cdn.com/201...8e82d13a1c.jpg
https://uploads.tapatalk-cdn.com/201...37b7dd2604.jpg
https://uploads.tapatalk-cdn.com/201...4fc7ffd171.jpg
https://uploads.tapatalk-cdn.com/201...851d86ec26.jpg
https://uploads.tapatalk-cdn.com/201...4e02675c30.jpg
Sent from my SM-G930F using Tapatalk
Damn that is looking nice, if it sounds half as good as it looks it's going to be pretty special
Day 10: Part 3
Once the final coat was finished and dry, final knock back was with 0000 steel wool
https://uploads.tapatalk-cdn.com/201...bb1673e720.jpg
https://uploads.tapatalk-cdn.com/201...5b658414a5.jpg
https://uploads.tapatalk-cdn.com/201...2c3658934f.jpg
https://uploads.tapatalk-cdn.com/201...69b86c56e3.jpg
https://uploads.tapatalk-cdn.com/201...78b07787cb.jpg
https://uploads.tapatalk-cdn.com/201...1968cc8696.jpg
Sent from my SM-G930F using Tapatalk
Day 10: Part 4
https://uploads.tapatalk-cdn.com/201...523d98dd42.jpg
https://uploads.tapatalk-cdn.com/201...302709765e.jpg
https://uploads.tapatalk-cdn.com/201...111c93aecf.jpg
Don't get used to the truss rod cover, it broke in two when I tried to drill it for the locating screw!
https://uploads.tapatalk-cdn.com/201...5a16a9a019.jpg
https://uploads.tapatalk-cdn.com/201...fac2dae21c.jpg
Started adding bits and pieces
https://uploads.tapatalk-cdn.com/201...30d64438be.jpg
Sent from my SM-G930F using Tapatalk
Day 10: Part 5
Love the shape of the volute and Gotoh 510 tuners
https://uploads.tapatalk-cdn.com/201...ba4d2f513a.jpg
The Silver Quandong has so many colors going through it
https://uploads.tapatalk-cdn.com/201...a9c185966f.jpg
Head stock is a little plain without a logo, but a new truss rod cover will make a difference.
https://uploads.tapatalk-cdn.com/201...e6afcd5bcf.jpg
Have I mentioned how much I love this timber!!!
https://uploads.tapatalk-cdn.com/201...3e553f2067.jpg
Sent from my SM-G930F using Tapatalk
That is absolutely superb Zandit75, you have both my envy and admiration. I really want to hear this now.
Unfortunately you'll have to wait till tomorrow!! But thank you for the kind words!!
My body is almost at its limit, my fingers are aching, feet are killing me, my nose is so filled with sawdust I don't think I'll ever get it clear!! I'm just glad I've had no reaction to the dust, apparently it is an irritant to some people.
But, I'd never miss out on this opportunity if it becomes available again!
Sent from my SM-G930F using Tapatalk
Looking really classy.
I love that cutaway, but talk me through the squared off neck heel, is that a comfort or functional feature? I don’t recall having seen one before. On most that I’ve played it still tends to be quite rounded off.
Thanks bud. The heel is purely aesthetic, and just a personal choice for this build. As with the florentine cutaway, I wanted something different from my other guitars. There are a number of brands out there with similar designs, some go to a finer point, others are even bigger.
Sent from my SM-G930F using Tapatalk