Mine had the same light section except it was on the back. Wonder if its from the same plank?
Printable View
Mine had the same light section except it was on the back. Wonder if its from the same plank?
Quite very well could be sister of Blasteroid haha. My 3yo daughter has nicknamed this one "single girl". She's labelled the other ones too - Strat project is called "Minty" and "Browny Boy" is the PRS lol she hasn't seen the LP yet - neither has the Mrs [emoji6]Quote:
Originally Posted by Richy17
I had good success with my scrap testing applying timbermate really rubbing it in, then wiping straight off across the grain with a damp cloth. Rinse the cloth in bucket of water and keep going. Letting that dry then applied FW sanding sealer straight over the top without sanding. Once the sealer dried, then I sanded back to 400grit. My idea here was to preserve the filler and seal it into the grains without pulling too much out in the sanding process. We will see how that schedule goes on the body.
Timbermate wiped: https://uploads.tapatalk-cdn.com/201...7bda57a112.jpghttps://uploads.tapatalk-cdn.com/201...e0518bd37b.jpg
Wet sanding sealer front and sides:
https://uploads.tapatalk-cdn.com/201...5d4d3186c2.jpghttps://uploads.tapatalk-cdn.com/201...a988938567.jpg
Haha my wife hasn’t seen any of my kit builds yet 😂Quote:
Originally Posted by Bakersdozen
Dried sanding sealer on the top, now to do the neathhttps://uploads.tapatalk-cdn.com/201...34553b332f.jpg
Wet sanding sealer underneath
https://uploads.tapatalk-cdn.com/201...a99ce70571.jpg
Keen to start sanding over the next few days to see what that reveals
First soak coats of TruOil on. I can see a few dust bunnies already, but will give it a run over with the white scourer and then maybe sandpaper depending on how it looks after a night. Was able to do the front and sides this morning and the back just now given the heat today in Melbourne, but I'm still going to leave it until tomorrow to do anything more given its the first coat.https://uploads.tapatalk-cdn.com/201...627e801de9.jpghttps://uploads.tapatalk-cdn.com/201...037dadb1c7.jpg
No update for a while . Tru oil Tru oil and more Tru oil. Neck is coming along nicely too, but can't reveal that one yet [emoji16]https://uploads.tapatalk-cdn.com/201...41ae02d6cf.jpg
The red is just a reflection and the other funny looking bits in the horns are too
Tru Oil, Tru Oil, Tru Oil, level and repeat.https://uploads.tapatalk-cdn.com/201...0e0a006a06.jpghttps://uploads.tapatalk-cdn.com/201...88b9152548.jpg
BTW, I have found these great for single use application of a layer of Tru oilhttps://uploads.tapatalk-cdn.com/201...722bfb80f4.jpg
But are they any good for removing make-up? *Asking for a friend.