Printable View
Got the plates glued and sealed tonight. Used construction gap filler for the edges and general purpose glue for the middle, just for strength.
http://uploads.tapatalk-cdn.com/2016...acfc390229.jpg
http://uploads.tapatalk-cdn.com/2016...348a362a5e.jpg
http://uploads.tapatalk-cdn.com/2016...cd7c45dfa0.jpg
no more gaps, the prop makers friend!
Wow, that's really out there dude. Keen to see the final outcome.
P.S. I'm very happy with my Dremel router.
Today I applied one coat of primer over the whole body. It showed where the plates were not completely sealed and I filled these gaps with more 'no more gaps' ☺
http://uploads.tapatalk-cdn.com/2016...32b9f2a33a.jpg
http://uploads.tapatalk-cdn.com/2016...2c320e2d87.jpg
The neck got some blue applied too. I'm going to mask the parts I want to keep blue and will then apply the next colour.
http://uploads.tapatalk-cdn.com/2016...9393cd5ed3.jpg
http://uploads.tapatalk-cdn.com/2016...85014f7f80.jpg
Starting to look nice!
:D The force is strong with this one :)
And here we go with 2x coats of white.
With tape still on:
http://uploads.tapatalk-cdn.com/2016...bea6e2e86e.jpg
And tape off:
http://uploads.tapatalk-cdn.com/2016...54da6f5040.jpg
http://uploads.tapatalk-cdn.com/2016...79f36e0ee0.jpg
And the back:
http://uploads.tapatalk-cdn.com/2016...64a316e99a.jpg
Pretty happy so far. Some clean up to do once it's dry but managed to get the tapes off without tearing too much paint off
This axe is looking really great.
Sent from my Moto G (4) using Tapatalk
Junior should be a happy little vegemite when you are finished.
This is gonna look cool