Fantastic! Can't wait to see the rest of the build.
Sent from my moto g(7) using Tapatalk
Printable View
Fantastic! Can't wait to see the rest of the build.
Sent from my moto g(7) using Tapatalk
First mods. 5e3 chassis drilled to accommodate the turret board with 6mm stand off screwshttps://uploads.tapatalk-cdn.com/202...535e96b0da.jpg
Sent from my Pixel 3 using Tapatalk
For anyone interested, Mojotone have put up a step by step guide to building the 5E3.
https://www.youtube.com/playlist?lis...214Nvb0PnZ-u4M
Most of the videos appear to be public
Good find. I'll have a look at that soon. I'm still toying with the idea of an amp build but another project has piqued my interest as well.Quote:
Originally Posted by Andy40
Nothing wrong with that Woltz....nothing wrong with that:cool:
I was Ill prepared for the size of the magnet on this one! Wholly Moley. Good this this one says 8ohmhttps://uploads.tapatalk-cdn.com/202...937ae57482.jpg
Sent from my Pixel 3 using Tapatalk
It will fit though, right?
That’s a mother! For use in quiet, gentle folk music of course!Quote:
Originally Posted by Andy40
Mmm, that speaker does look tasty
This is the board soldered up. After some chin scratching I decided to change the cathode resistor to 10w and snuggled the bleeder resistor 220k 1w from the first filter cap's + to ground. I made sure that all resistors are about 1-2mm off the board. https://uploads.tapatalk-cdn.com/202...d2aba91bdd.jpghttps://uploads.tapatalk-cdn.com/202...1ce8403066.jpg
Sent from my Pixel 3 using Tapatalk