Looks great! I'd keep as is - personally I like some grain showing through
Printable View
Looks great! I'd keep as is - personally I like some grain showing through
can you glue the pickup ring on from the back of the pick guard?
Nice smooth satin looking sheen...Quote:
Originally Posted by stuzl873213
Great idea Deddy.Quote:
Originally Posted by Dedman
Given me an idea.
If I:-
a) inset the mounting ring into the body so that it is flush with it
b) I open up the holes in the Pick guard so that it fully reveals the adjustment screw head.
Then I can the use the pick guard to effectively sandwich the pup in place, allowing it to be adjusted and allow the pick guard to be folded back without removing the pup (a bit like the jbase pup)
mmmmmmm, might work?
On further inspection I reckon go with out the PUP mounting ring and just squeeze the spring in under the scratch plate.
If tempted to countersink the screw holes suggest using a drill bit by hand moved in reverse direction so that it doesn't bite and tear out big chunks. Be careful as you still need a bit of thickness for it to work properly.
The whole point of this is to try and get around the issue of having a loop of wire that runs through the body between the neck and control cavities and that's connected to the pickguard at both ends, which makes wiring and removing the pickguard very difficult unless that cable loop is very long.
Another option is the old fashioned Tele Neck mount method where those holes on top of the scratch plate are there for a small jewellers phillips head screw driver to do the raising or lowering of the PUP. Underneath you would need to figure out whether to countersink a section for the proper HB mounting ring to sit and do its thing or use longer screws and screw down into the body at the bottom of the PUP rout. The latter option is far more fiddly as I had to do a similar thing when top loading HB's in my EX-1 without using any mounting rings.
Ok
Trying first extra gloss top coat on back. Logic is that if I put a coat or 2 of finish on then when I glue the neck on it is hopefully easier to clean up. Once the neck is on then a couple more coats, leave it for a month and then buff up.
So the pics are with the newly applied extra gloss top coat on the back of the body (weird affect of light on the rhs) and the neck after its first coat of Dark Onyx.
Attachment 21419Attachment 21420Attachment 21421
I love that headstock shape! Really cool man!