Printable View
Well after 2 weeks of work I've finally got it down to as much wood as I can get. I've applied a sanding sealer and rubbed it back to 1200. Waiting for lacquer to arrive.
Attachment 7439 Attachment 7440
The neck is finished after a fret level, fret crown and polish. Given that I've rubbed the body to 1200, will I need to rough up the surface to apply the nitro lacquer?
I've installed the tuning pegs and I've noticed that the washers don't sit flush with the surface. Can anybody who has already built an LP tell me if you need to countersink the top part of the tuner holes.
Hi Salo, some LP kits have flat tuner washers and some are domed which you have. No need to do any modifications. Have the dome pointing up they will fasten fine with the threaded nut ontop
Thanks mate
Paint has finally arrived. Here is what she looks like after one coat of Lake Placid Blue.
Attachment 7743Attachment 7744
Hey Salo I like the colour. Have you put any primer coats on ? Can still see some grain in parts. Also would be important that you grain filled before the primer coat or you will never get a flat finish.
Hi Wokka. I've used sanding sealer. Where it's a bit grainy is where there is some of DT is in the grain that I just haven't been able to get out. I've applied a second coat couple hours ago and it seems to have covered really well.
no worries Salo, after a 3rd coat the colour should be solid
Well here she is with a third coat and sanded down for the last coat.
Attachment 8244Attachment 8245
colour is looking better Salo and more consistent.
Look forward to seeing it after the final coat.
If I had a dollar every time I thought the last coat WAS the last coat I'd be well retired haha