A simple jig is required to hold the rough cut plenum for machining..
Printable View
A simple jig is required to hold the rough cut plenum for machining..
Next job is to mark out the plenum base and cut and drill the required holes...
And Bazinga! One completed plenum ready for use :)
Clever. Much easier than setting up an angled support to rout off.
Nice work around DB. You can reuse the plenum for any other neck pockets with a break angle
Great stuff . One of your favourite sayings is There's always a workaround. Great to see a video of you using this DB.
DB, thanks for sharing this with us. Fascinating to see the process.
Sent from my SM-T700 using Tapatalk
Routs: Check.
Body cut out: Check.
Now its off to the router table.... Gulp! :p
now thats purdy!!
looks excellent DB, what you routing on the router table now ? Body looks almost 50mm thick but no doubt that will come down when you shape the arch top
Very nice. For a second I thought there was a horizontal split in the cap. Nope, trick of the light. Don't let that router smell your fear... You are the toolmaster, it is merely the tool. :P