Stompland, The pedal thread

I don't pay live anymore but when I did I used a late 70's Cry Baby Wah which finally just died completely. It was the only wah pedal I ever owned.
The rest of my pedals were all T.C Electronics.

http://www.tcelectronic.com/vortex-flanger/

http://www.tcelectronic.com/flashback-delay/

http://www.tcelectronic.com/corona-chorus/

http://www.tcelectronic.com/mojomojo-overdrive/

http://www.tcelectronic.com/spark-booster/

http://www.tcelectronic.com/polytune-2/

If I ever go back on stage they will still be the only pedals I'd use. I just loved them. Small so my pedal board wasn't huge. Tey didn't cost an arm and a leg like some boutique pedals do.
Right now for recording I'm looking at several different processors. The problem is they all have WAYYY too much to them. Much more then I will ever need or use. All I need is an amp modeler, flange, chorus, delay, overdrive and a wah.

Here is mine.
From guitar > tu2 tuner> 70s crybaby> mt2 metalzone > od1 > mi audio blue boy > joyo distortion > ds1 > ph2 > dano flanger > dd7 with a home made tap tempo built into a tuna can into a sovtek MIG 50 head, Marshall 1922 2x12 cab. Pedals are run of a joyo brick, bullet proof and cheap, and all housed in a ebay special case. I've just recently gotten hold of a 6505+ 2x12 so for that amp I'll run a dd7 and ts808 through it and leave it be. Or I could aby both rigs and slay!

Quote:

---

Originally Posted by andrew

Or I could aby both rigs and slay!

---

Oh yeah, do that. \m/

Holy crap. Is that 5 dirt boxes? And no fuzz....I know what you need...

Yeah its a bit excessive but the sovtek is only a single channel amp.

Uhmm Pedal board or pedal pile. pulled it apart for a reconfig 6 mths agop but since getting a HT5 Metal Head haven't used any.

Currently my FX Chain goes like this:


Gibson USA Les Paul Studio>Korg Pitchblack+ Tuner>Jim Dunlop JH-1 Jimi Hendrix Wah> Boss BD-2 Blues Driver> Marshall MA100C 2X12 100 Watt all Valve Combo Amp.


I've got a few other pedals I could add to my fx chain:


Jim Dunlop JD F2 Fuzz Face (has two NTE158 Germanium Transistors in it).

Home Made Tonebender Mk I with three AC125 Germanium Transistors.

Home Made Tonebender Mk II with three DSI OC81D Germanium Transistors.

Home Made Baja Real Tube Overdrive with an Electroharmonix 12AX7WA Tube.

Home Made Soldano GTO Supercharger Hi Gain Tube Overdrive (Has two Sovtek 12AX7/7025 that it runs at 260V DC).

Home Made Univibe with external speed control and three-mode voicing switch.

Home Made MXR Dynacomp.

Zoom G2.

Digitech RP50.

Pandora PX5D.

http://i.imgur.com/9iFTdG6.jpg?1

thought i'd post a pic of my humble ikea board

looking for a delay/reverb but no dosh at the moment

nice one Nicko, so you converted some IKEA furniture into the pedal board and painted it orange to match the amp ?

Yeah mate a pack of shelving that was about $20 from memory. Cheap and easy conversion. Underneath there's a power board hidden and I'll eventually hide the power supply under there too when I get some more cable ties.

nice one Nicko, so are the black strips velcro to stick the pedals down ? Sure you will finish the mods soon and tidy up the power supply