Printable View
Only one word necessary.Quote:
Quote from Gavin1393 on February 19, 2013, 10:44
Here we go - based on Andy's request and photographic directions!Quote:
Quote from GlennGP on January 23, 2013, 15:42
Not my colour, but I'm sure someone out there's getting hard looking at this! Nice work, mate.
GGP
http://pitbullguitars.com/wp-content...ip-Photo10.jpg
http://pitbullguitars.com/wp-content...c5e-Photo6.jpg
Wow.
That is the very best way to describe that Stui...Quote:
Quote from stui on February 19, 2013, 11:20
Only one word necessary.Quote:
Quote from Gavin1393 on February 19, 2013, 10:44
Here we go - based on Andy's request and photographic directions!Quote:
Quote from GlennGP on January 23, 2013, 15:42
Not my colour, but I'm sure someone out there's getting hard looking at this! Nice work, mate.
GGP
http://pitbullguitars.com/wp-content...ip-Photo10.jpg
http://pitbullguitars.com/wp-content...c5e-Photo6.jpg
Wow.
Wow.
..and it has only had two base coats....a few more coats to go.
Thank you, lovely, look forward to seeing this ready to play.Quote:
Quote from Gavin1393 on February 19, 2013, 10:44
Here we go - based on Andy's request and photographic directions!Quote:
Quote from GlennGP on January 23, 2013, 15:42
Not my colour, but I'm sure someone out there's getting hard looking at this! Nice work, mate.
GGP
http://pitbullguitars.com/wp-content...ip-Photo10.jpg
http://pitbullguitars.com/wp-content...c5e-Photo6.jpg
And here it is in the "Ready to Play" state. Sounds sensational too!Quote:
Quote from andypwudtone on March 3, 2013, 08:15
Thank you, lovely, look forward to seeing this ready to play.
http://pitbullguitars.com/wp-content...d-Photo16a.jpg
http://pitbullguitars.com/wp-content...65a-Photo4.gif
This is the ES-1G (335). Built almost completely from a Standard Pitbull kit. Painted with ColumbiaAzure Lagoon from Wudtone on the body and 'clear' on the neck and finished in extra-gloss-no aging.
I have used the standard Humbucker Pickups but significantly upgraded Capacitors to orange drops and inserted to 150 Resistor and .01 mf caps too! Tricked out the standard humbuckers with gold trimming and swopped out the plastic nut for a brass one! Sustain! The fretboard is completed with Dr. Ducks Ax Wax for good measure!
No pickguard on this model. Inserting the wiring was challenging and I have documented those challenges elsewhere in the forum. I have wanted a '335' for sometime and this is going to be an enduring favourite guitar of mine.
http://pitbullguitars.com/wp-content...-12013-032.JPG
http://pitbullguitars.com/wp-content...-12013-033.JPG
http://pitbullguitars.com/wp-content...-12013-034.JPG
This is the ES-1G (335). Built almost completely from a Standard Pitbull kit. Painted with ColumbiaAzure Lagoon from Wudtone on the body and 'clear' on the neck and finished in extra-gloss-no aging.
I have used the standard Humbucker Pickups but significantly upgraded Capacitors to orange drops and inserted to 150 Resistor and .01 mf caps too! Tricked out the standard humbuckers with gold trimming and swopped out the plastic nut for a brass one! Sustain! The fretboard is completed with Dr. Ducks Ax Wax for good measure!
No pickguard on this model. Inserting the wiring was challenging and I have documented those challenges elsewhere in the forum. I have wanted a '335' for sometime and this is going to be an enduring favourite guitar of mine.
http://pitbullguitars.com/wp-content...-12013-032.JPG
http://pitbullguitars.com/wp-content...-12013-033.JPG
http://pitbullguitars.com/wp-content...-12013-034.JPG
Nice. Great choice with the fittings too - but, curse you, you're making me want to unbox my ES kit and start on it right now! I do love a brass nut though... may have to consider one for mine.
BONE for TONE!!!!!!!! he he ehhh. I will shut up now.