My first kit build - GS-7Q

Hi Blocka,
it would pay to start your own build diary and post your questions there.

I think Eric67 had the same issue with the bridge ground wire not being drilled. See post 10 of this thread.

As for the wiring diagram. Is it "Two Humbuckers to 2 Pots and a 3 way Switch" ?

Quote:

---

Originally Posted by Trevor Davies

Hi Blocka,
it would pay to start your own build diary and post your questions there.

I think Eric67 had the same issue with the bridge ground wire not being drilled. See post 10 of this thread.

As for the wiring diagram. Is it "Two Humbuckers to 2 Pots and a 3 way Switch" ?

---

That’s how I found his thread, has given me much information. And good to know I’m not the only one with the issues.

It is indeed. 2 humbuckers, 2 pots and 3 way switch however the diagram in the website doesn’t have all the wires coming from the pickups


Sent from my iPhone using Tapatalk

Do the humbuckers have 4 wires with 2 already soldered together?

If that is the case - the two that are soldered together just need to have their soldered connection taped up (so it cannot be accidently grounded in the control cavity) and then ignored. Those two wires literally are just joining the two single coils of the humbucker together in series.

Quote:

---

Originally Posted by Trevor Davies

Do the humbuckers have 4 wires with 2 already soldered together?

If that is the case - the two that are soldered together just need to have their soldered connection taped up (so it cannot be accidently grounded in the control cavity) and then ignored. Those two wires literally are just joining the two single coils of the humbucker together in series.

---

Yep two twisted together and then two more on each pickup 4 wires each

Edit, they actually have 5 wires
https://uploads.tapatalk-cdn.com/202...362ad4fd61.jpg



Sent from my iPhone using Tapatalk