-
5 Attachment(s)
Today, I didn't do much with the guitar pieces as I had some urgent client work. I mean, in this current crazy times, you don't hesitate when a client calls, even if it means to ditch lunch ;-)
However, I had some spare time in the morning which I used to design and print a decal for the headstock. As I wanted to have a copper decal, it was a lot of trial and error. I even experimented with copper plating the text but this was not a good option. Then, I tried toner activated foil, but this didn't work either. So I mixed some metallic acrylic ink and filled in the decals by hand. First I tried it with a tiny brush, but this actually was very hard and not precise. After that, I tried some fountain pen nibs but these were too sharp and scratched away some of the prints. Luckily, I had an idea that worked out in the end. I used a dried marker as a pen, dipping it into the ink. Finally. It took me around 2 hours to finally get a decent decal. I made a few because I figured I'd f*ck up a bunch of them when applying, but I didn't. Now I have a looot of decals ;-)
Attachment 35123
A freaking lot of decals:
Attachment 35125
Attachment 35124
After applying the decal:
Attachment 35126
And after a coat of tru oil:
Attachment 35127
-
3 Attachment(s)
I also got a set of new knobs with abalone top. I still hope to get some green and blue colors on my pickguard to match them a bit.
Attachment 35129
They look nice :-)
I also ordered a replacement for the super ugly black switch know. But it's gonna take a while, coming all the way from China...
Attachment 35128
On the 4th or 5th coat of tru oil, the back developed a really nice shine. I really love it. But as I heard that some people put 30 coats of tru oil on, I think there is still a loooong way ahead of me...
Attachment 35130
That's it for today. I think I'll spend the next days with nothing more than putting on coats of oil, so I'm not sure if I have any interesting updates on the way...
-
Nice work. I tried that once but it didn't work that well so I gave up.
If you want a less shiny, more satin, finish, then you could leave it at 5 or 6 coats of TruOil, but if you want a flat really shiny finish, then you need enough depth of finish to sand it flat and polish it up again, whilst still leaving enough thickness to provide protection for the wood.
-
Sanding and oiling becomes a bit of a way of life for a while. ;)
-
Love those new knobs, and the oiled finish is looking good too
-
Knobs look great.
Just keep going with the oil until you are happy with the gloss level. Looking good so far.
-
4 Attachment(s)
So far, I am adding coat after coat of tru oil. I'm rubbing it with 0000 steel wool every 2-3 coats because I keep finding dog hairs sticking in the coating all the time :mad:
After the steel wool:
Attachment 35152
It looks very shiny:
Attachment 35154
Attachment 35151
Attachment 35150
However, it's starting to look really nice, although I'm a bit worried the tru oil won't be very tough / resistant later? Is there anything I can do to make it a bit harder? I'm just scared the knobs and seams of my jeans could eventually scratch it or even rub through it, even after it is cured? What do you guys think?
-
5 Attachment(s)
Oh, and... I redid the pick guard. I wasn't happy with the first try and when I added some more ammonium (hoped for more colour), it just ATE right through the copper leaf. Bummer.
So re-plated it and added 5 layers of leaf this time.
Also, I had the genius idea (hahaha lol!) to do a test piece first. (Lightbulb goes on)
So here is some plastic covered with just one layer of copper.
Salt and ammonia on the left, salt and vinegar on the right.
Attachment 35160
After an hour, it looked amazing (even though it ate through the one layer of copper easily).
Attachment 35161
So now trying the pickguard:
Attachment 35159
After 2 hours, still no luck.
Attachment 35162
So I actually gave up on my hope of getting some blue or green colors. I left it like this over night, hoping it would dry out and I could maybe brush on a little ink (it's cheating, I know! :D ).
After I woke up in the morning, NOTHING had happened to it! It still wasn't dry! So I took it out, threw it on the coffee table, forgetting about it until 2 hours later.
Went into the living room, and found this!
Attachment 35158
Fiiiiinally! I really love how it turned out! This evening, I'll be sealing it with spray lacquer. I hope it will keep its amazing look! :cool:
-
The Tru Oil dries pretty hard if you leave it for about a month. I had to sand it off a guitar as I'd sanded through the TO and messed up the finish, and a lot of it was very hard work indeed.
Nice work on the pickguard. If you haven't done so yet, I'd wash it thoroughly a few times before putting any finish on.
-
Tru-oil was originally designed for coating the handle of guns/rifles.
It does dry very hard, you just need to give it time to cure.
Simon is right on the money with it - give it a month at least to cure and harden off.
In Sydney in summer (think daytime temperatures in 30s up to low 40s and low humidity) and I gave about my last one at least a month to harden right out.
You are fortunate to be coming into summer in Hamburg but I don't know that it really get warm in comparison. Patience is important, but you look like you are getting a good finish.
