got my 2 strats today both of them are really great quality same as the telecaster I got the other week was a nice piece of wood as well haven't got a plan of attack for them yet
https://i.imgur.com/itDvxZl.jpg
Printable View
got my 2 strats today both of them are really great quality same as the telecaster I got the other week was a nice piece of wood as well haven't got a plan of attack for them yet
https://i.imgur.com/itDvxZl.jpg
Yes I got the Lincoln - LCS24 24L Oil-Free 1HP Silent Air Compressor. Also got a hose and connections matching the Star gun.Quote:
Originally Posted by McCreed
I have not got an inline filter yet with a regulator, or a second hose as they had run out of stock!
Bit of an update the 24 fret strat has its clear done so now needs to wait a couple of days to harden and then polish this 1 I've used the rit dye racing red, I have sanded it every 2 double header coats of clear picture doesn't do it justice has a nice shine off the gun
https://i.imgur.com/DqrcRsG.jpg
https://i.imgur.com/5PVdNva.jpg
I really like that burst.
Great gloss even before polishing!
Nicely done.
Thanx guys
got this done today used RIT yellow dye and a little warmer for the burst, the burst on this was a real pain it kept bleeding into the yellow making it too harsh, I did the yellow and used a binder over it but still kept bleeding, did the yellow and then 2 coats of clear to seal the yellow then I shot the burst, I'm thinking the mahogany wood was like a sponge, the other strat I haven't a plan for yet I did a matching front of the headstock the same but might go with a bit darker on the burst, not sure if I will go over it with lacquer or 2k clear see what it's like when I get there, for those interested I used a small touch-up gun with 1.0mm needle with the fluid almost off with 8 psi at the gun anymore it was way too much fluid still would have liked it more subtle it is possible I may redo the burst, but give you an idea where im heading with this bugger
https://i.imgur.com/Jm8HmW1.jpg
https://i.imgur.com/uMALsN5.jpg
https://i.imgur.com/OqDXbCi.jpg
I like the colour combination.
You going natural/clear on the back of the neck?
yep just the front of the headstock was hoping to clear it but had a slack day did get much doneQuote:
Originally Posted by McCreed
had a busy day I have got both mahogany strats in clear will let them cure and sand them back and drop a couple of flow coats then ready to polish, I have finished the 24-fret strat and polished just haft to do some headstock decals and clear them in, 1st mahogany strat is yellow Rit dye black burst its got about 12 coats of clear it's going to match my tele, 2nd strat I redid the burst I wasn't happy I mixed up Oak stain with 40% clear which made it blend better both these are going to be my go-to guitars I'm going to put 1 with noiseless alnico pups, and the other twin rail pups and better bridges on both, the next 1 is the red and black Strat it's staying like it came pretty much stock just with the 24 fret neck all 3 have 3 coats of binder 1 under the dye and 2 over it then clear
1 Rit yellow dye with black burst 12 coats of clear lacquer over 3 coats binder for grain fill
https://i.imgur.com/B9ZXCO3.jpg
https://i.imgur.com/Lw0Puy0.jpg
2 Rit yellow dye oak burst 8 coats of clear lacquer over 3 coats binder for grain fill
https://i.imgur.com/C72EO2G.jpg
https://i.imgur.com/llnH9UE.jpg
3 Rit racing red dye, black burst 12 coats clear lacquer 3 coat binder under the red
https://i.imgur.com/DmwTxJY.jpg
https://i.imgur.com/yCvm8Wp.jpg
VERY nice phrozin!