Cheers Andy. I've used DT before on the Spalted LP and it came up a treat, probably just the horrid weather for the last month that's causing me issues.
So your Tele is Tru Oil over DT ?
Cheers Andy. I've used DT before on the Spalted LP and it came up a treat, probably just the horrid weather for the last month that's causing me issues.
So your Tele is Tru Oil over DT ?
Assembly time.
Attachment 30117
Attachment 30118
Attachment 30119
Attachment 30120
Together, needs a bit of relief adjusted into the neck, but will leave it for a few days to settle down before doing anymore adjustments.
Think I'm happy with this one.
Attachment 30121
Attachment 30122
Attachment 30123
Looks great! How does it play?
Electrics are all good, but need to get neck right yet before its fully good to go.Quote:
Originally Posted by TZK321
Looks superb.
Sent from my SM-A520F using Tapatalk
nice job, looks great, well done! I play my PBG TL51 more than any other guitar i have, there's something about that design which is simply wonderful.
Cheer folks.
My original TL51, although aesthetically it may not be quite what I hoped for is probably tied in 1st place for most played. It may be relegated once this one is dialed in, we shall see.
Spent some time getting things sorted last night, no buzzes. Only playing through headphones but at the moment really not happy with how it sounds, especially the treble side of things, G string is just horrid. A simple D chord, yuck. Had something similar before, on the other Tele funnily enough, turned out to be the nut
Oh well, I'll figure it out eventually or ship it off for a set up, but that will be a last resort.
Nut slot for the G not deep enough ?? and pulling it out of tune.Quote:
Originally Posted by Rossc0
For a simple nut file of the correct size you can give unwound strings a bash at a few angle with a hammer on a steel block ( vice ) to deform them a bit, wound strings will do the job on their own