Teisco, Vox teardrop look-a-like

Gday Neil,

The weekend turned to sheite so it didn't leave the case but I should have an opportunity over the next couple of days to run a tape over it

no worries, I hope all is ok. thank you for your time.

G'day Neil,

All OK it was just the family kept making demands of my time ( as they do )

Finally ran a tape over the L202 and here's the results.

Neck has 22 frets and is 4 bolt, no idea of the fret size and neither did Maton but from memory were similar to to the PB ST frets, trussrod nut is as the body end of the neck.

The neck thickness is a bit thinner than my Squier CV Tele Thinline I can run a caliper over it if you wish.
Scale - 592mm
Width @ nut - 42mm
Width @ 12th - 53mm
Width @ 22nd - 58mm
Body thickness - 40mm
Body width - 329mm
Body length - 426.5mm

nice one DK, gee that scale is short - works out only 23.3 inches !

Rest of the dimensions look pretty standard

Excellent, thanks heaps for that.

I'm doing 24.75" scale

And now I can check my body dimensions for the template.

Thanks again.
Neil

Awesome, my template printed out was only out by about 6 mm.
Not a bad attempt for my first go.