Double Cut Juniors

mini loom for Junior, and P90
http://www.pitbullguitars.com/wp-con...iq5-001sml.JPG
http://www.pitbullguitars.com/wp-con...P90-001sml.jpg

sweet

Hi Paul,

Looking forward how you progress with these Juniors,
What type of finish have you planned for these Juniors?

Budi

Quote:

---

Looking forward how you progress with these Juniors,
What type of finish have you planned for these Juniors?

Budi

---

Hi Budi. Planning on Carmine Gypy Red Wudtone for the PBK '54 Kit and TV Yellow(or close), probably use Sun Yellow as most of the store bort stuff isn't translucent. The White Knight Kryllic seams to be translucent so I'll go with that for the 58 Kit. The '58 kit does not have much grain figuring so a semi sold will be OK on it.

I had hoped to have been a bit further along with these builds. But I've been to busy fixing my sons car and going to the post office to post stuff out to people. Good luck with your Kits. Bud. ;)

Cheers PK

Ok Ok I can now say I have officially started on the 58 Double Cut.
knocked off the plastic Nut. now have a Bone nut from Cos at Novella.
First off was to check the set of the neck to the body. I put the straight edge along the Nutless Neck to the Bridge. The bridge is sittng on the control cover plate to compensate for the height of the posts.
The Heineken is to keep things in Balance.... LOL



http://www.pitbullguitars.com/wp-con...cut-002sml.jpg
http://www.pitbullguitars.com/wp-con...cut-001sml.jpg
http://www.pitbullguitars.com/wp-con...cut-003sml.jpg

Thanks like wise

Budi

Noticed that there seems to be a Heineken at each end. Good plan. Never too far away.

Hi Brendan

Quote:

---

Noticed that there seems to be a Heineken at each end. Good plan. Never too far away.

---

Ha ha ha Trick photography.

PK

Body Prepped and redy for Sanding Sealer.

Cheers PK


http://www.pitbullguitars.com/wp-con...cut-001sml.jpg