Prices...

Quote:

---

/<\\/p>[/<\\/p>[]<\\/p>/]<\\/p>/Quote from dingobass on June 12, 2013, 21:12

Quote:

---

/<\\/p>[/<\\/p>[/<\\/p>[]<\\/p>/]<\\/p>/]<\\/p>/Quote from adam on June 12, 2013, 19:15
Hey guys, if you do take advantage of the "July 1 Price Guarantee", please put a note on your order so we know to keep your order on hold.

There's a "Order Notes" section when you place an order, so just put "July 1" or something like that in there so we know what's going on.

Gav, I've put a note on yours.

Cheers

---

And that note says.
DB to remove frets and give the kits a first coat of Conch Girl.

---

DB, im scared now about the StratoPester..... I dont want a pink, fretless Strat!

would have liked to take part in this "pre-order", but alas I don't get a tax return being a pensioner.... bummer hey!

And I'm outta money :( .....
Looks like my StratoPester mods will have to wait a bit...

Hey Pest have you checked to see how much routing is required for your mods ? I reckon a bucker would probably fit inside the standard route, just need to cut a bigger hole in the scratchplate maybe ?
Pretty devo that you didn't take out the first member to reach 1000 posts Pest !

Quote:

---

/<\\/p>[]<\\/p>/Quote from wokkaboy on June 13, 2013, 15:27
Hey Pest have you checked to see how much routing is required for your mods ? I reckon a bucker would probably fit inside the standard route, just need to cut a bigger hole in the scratchplate maybe ?
Pretty devo that you didn't take out the first member to reach 1000 posts Pest !

---

but he will no doubt be the first to 100,000 posts since the older crew on here will be dead and buried long ago! Age is on the Pest's side!

Well, I need a humbucker, a razor file from StewMac (to cut the guard), a push-pull pot, a black ice overdrive, wire, and I'm adding in some SM tools that will help me, which goes to $193, then there's the kit, that's $130 (at the moment), then there;s the Wudtone, that's like $43, then there's shipping for the SM stuff and the kit, so that's around $35..... Yep.... That's A LOT of money....

I dont know if a humbucker with the bridge single coil slant will fit in the rout, DB says it probably won't, someone needs to test that theory....

Quote:

---

/<\\/p>[/<\\/p>[]<\\/p>/]<\\/p>/Quote from keloooe on June 13, 2013, 16:16
Well, I need a humbucker, a razor file from StewMac (to cut the guard), a push-pull pot, a black ice overdrive, wire, and I'm adding in some SM tools that will help me, which goes to $193, then there's the kit, that's $130 (at the moment), then there;s the Wudtone, that's like $43, then there's shipping for the SM stuff and the kit, so that's around $35..... Yep.... That's A LOT of money....

I dont know if a humbucker with the bridge single coil slant will fit in the rout, DB says it probably won't, someone needs to test that theory....

---

** Have you checked your local RC-Hobby stores in your area for a razor saw? Could work out somewhat cheaper than from Stewmacs.....just a thought for you.. ad I'm not far off finishing my coil winder .. will need some practice on winding coils..lol might be able to come to an agreement for you..

Hey AJ! post some pics of the winder. With your woodworking skills I reckon it will look sensational!!

Nah, I prefer SM's razor files, a mate recommended them to me last night (DB did as well a few weeks ago!), And they can be used to do some headstock shaping, so it's a win-win situation!!!

Yes, post some pics of your winder!!! I'm thinking of doing one as well, Gav inspired me to want to try!!!

will post some pickies when it warms up a tad .. too cold for me atm to wander outside .... :(
Dam it's cold.. don't like the cold, don't like the heat of summer.. don't like the rain...whine , whine, whine... Must be getting too old now..