Filled the predrilled pickguard holes using pieces of wooden skewer. Also added a few grafts to the body routes where the new pickguard/control plate was either very close to the edge of the routes, or the new screw holes were inside the route.
Printable View
Filled the predrilled pickguard holes using pieces of wooden skewer. Also added a few grafts to the body routes where the new pickguard/control plate was either very close to the edge of the routes, or the new screw holes were inside the route.
Sanded the body up to 240 g.
As per Phrozin's rattle can instructions, I have purchased Sanding Sealer and rattle cans of Primer/Filler, Candy Red Pearl, and Acrylic clear coat. So far, I have given the body 3 brushed on coats of FW sanding Sealer.