AIB 1-F New build

Printable View

Show 40 post(s) from this thread on one page

24-10-2019, 09:45 AM
FrankenWashie

Quote:

Originally Posted by piece

Holes in the back is made by me for the bridge. Beware of the work fitting a Hannes bridge. Its alot of mesuring to do there before drilling.
It also took me some effort to find out how to handle all cabels as the manual from Shaller leave no clues what so ever.
Cover for the electronics has to be on top of the back as the body is so slim I can’t get the pre amp in, in any other way

Wash machine is unplugged 

i have the non piezo version on my TL, and yes, much measuring even without the piezo!
24-10-2019, 10:42 AM
fender3x

I really like the way this looks. Almost a bit steampunk.
24-10-2019, 10:03 PM
piece

1 Attachment(s)

Just to give an idea how it will look.
Now time for some glossy top finish
Attachment 32576
25-10-2019, 07:31 AM
RocknRolf

Love it, is going to look awesome with that hardware!
11-12-2019, 02:13 AM
piece

10 layers of clear coat so far and counting...
11-12-2019, 05:07 AM
RocknRolf

And then the waiting...
How are you doing temperature wise? are you spraying / drying indoors?
11-12-2019, 07:09 AM
fender3x

Tom Petty provided the soundtrack to finish curing...

Sent from my ONEPLUS A3000 using Tapatalk
11-12-2019, 03:56 PM
Simon Barden

It's not really the hardest part though. Annoying and frustrating, but not that hard.
11-12-2019, 10:41 PM
piece

Quote:

Originally Posted by RocknRolf

And then the waiting...
How are you doing temperature wise? are you spraying / drying indoors?

Put heat on after each layer.
Think the last layer will be done on friday.
13-12-2019, 04:55 PM
piece

1 Attachment(s)

Sneak preview
Attachment 32990

Show 40 post(s) from this thread on one page