Buzzing on contact

Success!

It’s now all strung up and set up and it is stunning.

Attachment 31929

Thanks for all the help,
Dylan

Cool! I like the white on white with body/pickguard. :cool:

I've just found that if I do it that way, it gives better contact and reduces noise more.

Quote:

---

Originally Posted by McCreed

T

Yeah, that'll get it done!
Just for curiosity, if you have some tape left, stick a couple of pieces overlapped on a bit wood and check it with the meter.
It would be interesting to know what you find.

---

Used the BGS stuff the other day when I converted an epi junior HB to a p90. I had no continuity issues and was super easy to work with. Didn't even solder the over laps as I thought I may have to.

^^^^^^^^^^^^^^^^^^^^
Good to know Bakersdozen. Thanks

I still have quite a bit of 2" stuff left, but I'll have to grab some of the snail stuff and give it go.

Quote:

---

Originally Posted by McCreed

^^^^^^^^^^^^^^^^^^^^
Good to know Bakersdozen. Thanks

I still have quite a bit of 2" stuff left, but I'll have to grab some of the snail stuff and give it go.

---

You may never use it all it's a 4M pack :D

I have used mostly Aluminum HVAC tape. When I discovered that I could not solder it, I got some copper tape for guitar that was a lot more expensive. I soon discovered that the copper tape did not take solder any better than the aluminum tape. It was only then that I discovered that the bother the copper* and the alu adhesives were nicely conductive. [Insert headslap here].

Even after applying liberal amounts of Alu Tape to my insulating-the-garage-door project, I still have what looks like a luthier's Lifetime supply of alu tape...which amounts to pennies per guitar.

*Some people have no trouble soldering copper tape so YMMV.

Sent from my ONEPLUS A3000 using Tapatalk