GPB 4B - GrainPopperBass #2 Build

Thanks Sonic, also trying to keep things a bit simple while I work on my filing & fine sanding skills.
Been so wet & damp in the air here last couple days I haven't made any more progress.

Quote:

---

Originally Posted by emuflats

Howdy All!
Been busy & forgot to start the build diary...
Well, here's the body of my 2nd build well on the way. Outta the box the grain on the ash was begging to be shown off. Sanded to 180 grit.

https://i.imgur.com/kklSGYs.jpg
https://i.imgur.com/CSW3RdB.jpg

Had my first crack at using Ebony Timbermate as a grain fill. Mixed to a thickened cream consistency & applied with a rag. It dried really quick & I tried to scrape of excess with a credit card but ended up with scratches.

https://i.imgur.com/HmjfTX6.jpg
https://i.imgur.com/yeDmxoY.jpg

I decided to just leave it messy & pay the penalty at sanding time. It came off surprisingly easy with a cork block & 180 grit. Seriously don't recommend this for those working inside their house. The dust smells terrible, even with a mask I could taste it. Final sand lightly with 240 grit.

https://i.imgur.com/6PMYs9u.jpg
https://i.imgur.com/2xMx8v7.jpg

Generously applied 1st soaker coat of Tru Oil - I nearly lost an eye when the grain popped!

https://i.imgur.com/JVlTqkn.jpg
https://i.imgur.com/i9d6gqb.jpg

I wonder how many coats Waz would do....

---

At least 20

Sent from my SM-A520F using Tapatalk

Quote:

---

Originally Posted by Sonic Mountain

Nice shape, classic without being weird. Hard to get that balance right.

---

Agree. I really like that headstock shape and with about 8-10 coats of TO it should look stunning.
No easy way to pop maple neck grain as it is too fine and tight for fillers and stain, inks or dyes can quite often look dull or just plain dirty. As TO ages it does bring out more & more of the neck grain.

Sent from my SM-A520F using Tapatalk