Im going to try simon, im still working on ideasQuote:
Originally Posted by Simon Barden
Printable View
Im going to try simon, im still working on ideasQuote:
Originally Posted by Simon Barden
Attachment 27956 Attachment 27957 first slab flattened out with the router, atill got 3mm to take of the other side. Adam was kind enough to sell me a maple neck with an ebony fretboard that was left over of a damaged kit, thanks Adam.
Attachment 27992Attachment 27993Attachment 27994Attachment 27995
Ive had a bit of fun today
getting the body blanks chambered and glued together
Are you building 2 Adam?
I hope the blanks glue together OK. You really need a lot more clamps to do it really well and get a lot of pressure over the whole area.
This is fully sick. I am loving how this is going.
Yes waz, one ive got a pitbull maple neck with an ebony fretboard the other im going to attempt to make my own out of some of the mahogany and i got a nice peice of bluegum to try a fretboard. I know Simon id already glued it up then realised the rest of my cramps were in the work trailer, seems to be all held together so far wont know till i start shaping
Attachment 28460 some gear turned up over the weekend, trussrod for the neck i got 2 it wasnt much dearer for 2 than 1, some mediun fret wire, and 2 dirty finger pickups, one for each guitar I'm thinking about only ane pickup and using a on/on switch to coil split just for something different.
watching with interest
Attachment 28461