-
Hi Chuck, I would be pretty confident that a ST-1 maple neck should fit in the JM-1 neck pocket as the heels are both rounded.
a TL neck is squarer and would need re-shaping. The scale length should be the same 25.5 inches.
Flick an email to Adam and I would say he should be able to do a JM-1 kit with a maple neck
-
I'm pretty sure they do, you'd have to ask Adam to be dure. I got a Ebony neck for my Jr-1 and it fitted fine.
-
Isn't that exactly what Zeromick did with his mash ups?
http://www.buildyourownguitar.com.au...ead.php?t=4071
-
spot on Pabs, good memory buddy !
-
Cheers guys, and that build from Zeromick is somewhat similar to what I'm looking at - with a bit of a twist!
-
Hi Chuck, just sent you an email o this.
For everyone else:
I just checked an ST-1 Neck in a JM-1 body and it does indeed match.
I couldn’t actually insert it without forcing, but that is consistent with the factory making the heels slightly oversized so there is no more ‘loose neck syndrome’. Will only need a quick sand on the sides to get it to sit snugly.
-