Replacing PBG Humbucker Magnet

Put your screws back in making sure everything lines up, re-solder the cover and your done, new A5 humbucker

Attachment 9546
Attachment 9547

You are an effing legend my friend....

As long as it helps alls good

Great write up tony, you need to do one on wax potting too!

Quote:

---

Originally Posted by stan

Great write up tony, you need to do one on wax potting too!

---

I did one a while back Stan

Hey Tony, If you are reading this.

I had a crack at replacing one of my PBG ceramic magnets with an A5. Followed these instructions, which are brilliant I might add.

I can see what you mean about the thinner A5 magnet. I intend to wax pot them (20% bees wax and 85% para) as soon as I've done all 4. However, you you think I should shim the A5 magnet with a bit of plastic or something? or will the wax be enough?

Also do you/can you replace the plastic tape around the coils?