Todays brain bender...

if we get it between us , i'll go you halves... but my money is nuts or bridges, heights, slots, shapes, string take off angles

For removing old nuts?

Is it for holding a fretboard and marking/ drilling side dots?

Quote:

---

Originally Posted by stan

looks like it has about six marks at the bottom and possibly four at the top, something to do with nut slotting/calculating

---

Nooooooooooooo :p

Depth stop for cutting slots in nuts or bridges

Quote:

---

Originally Posted by Crusader

Yeah, that's what I thought cutting bone to the correct height, length and slotting.

---

The correct answer is within this answer :)

Cutting/filing nuts to correct height

to get the correct curvature of the top of the nut ie a radius. Wider nuts to the left, narrower nuts to the right of the jig.
DB for the prize do you mean a custom cut bone nut ? MOP might be a bit brittle and expensive !

Cutting slots once the curve is done. Nut goes in vertically, moveable piece is an angle guide

Dingo claw trimming guide