im not sure yet i will see what the pre amp wiring has on it ,,, KIT arrived today very happy with ,, neck a little loss in joint tho, wish they were a little better fitting make setting neck a lot easier ,, will post pic later !!!! ,, have to start marking out the cut outs !!! and shaping head stock !!!!
8-)
http://pitbullguitars.com/wp-content...719_125232.jpgQuote:
/<\\/p>[]<\\/p>/Quote from muffbuffer69er on July 19, 2013, 19:22
8-)
http://pitbullguitars.com/wp-content...719_203300.jpgQuote:
/<\\/p>[]<\\/p>/Quote from muffbuffer69er on July 19, 2013, 19:22
8-)
marked out both cut outs ,, drilled out most of the wood ,, then use dremel tool to carve out the wood ,, then with my trusty files and 60 grit norton sandpaper spent 2 hours getting one side perfect ,, will do the other side tomorrow and will be doweling the holes from the stop tail for the bigsby to mount , will post pic when down ,, not to all the curves are all taken from the pickgaurd !!! THATS what i use for the template
all doweled up and cut outs done ,, !!! ,, be doing flames cutouts after sized up bigsby !!!!Quote:
/<\\/p>[]<\\/p>/Quote from muffbuffer69er on July 19, 2013, 19:22
8-)
http://pitbullguitars.com/wp-content...720_181853.jpg
thinking off adding a p90( in the middle ) ,, have to check my spare parts and wiring off harness with pre amp
Looking great! You make it look easy.
I'm inspired to start thinking of possible body shape mods of my own :).
Cheers,
Gavin.
Really awesome work there!
so got my head stock marked out and cut out ,, made the same shape as mark 1 sg make !!!!