Thanks for the advice DB, I'll give it a goQuote:
[b]Quote from dingobass on February 3, 2013, 21:15[b/]
Good question Stui.
Are the gaps in question where the neck meets the sides of the body?
If so the best thing is to try and get them as snug as possible.
I take it you are doing a sun burst finish?
If you are, after you have done the deep coats on the neck and body you could put it together, fill the gaps with TimberMate filler stained black.
Let the filler set for a few days and smooth it off with some steel wool then see how well it matches.
If needs be you could concentrate on these areas and keep applying deep colour until it blends in.
Hopefully by the time you have done the base coats the gaps should be no longer visible.
The down side to this approach is it can make it difficult to hold the Guitar securely whilst applying the finish...
