Acoustic Guitar Building Course

Day 9: Part 1
Big day, lots of little things coming together.

Shaped the tail of the Fret board. Keeping it simple. Matches the Headstock shape
https://uploads.tapatalk-cdn.com/201...4d2795c03c.jpg

Inserting the truss rod
https://uploads.tapatalk-cdn.com/201...f065948b36.jpg

A little sikaflex to hold it in place and prevent vibrations
https://uploads.tapatalk-cdn.com/201...c9ac0d0d75.jpg

Fret board glued on
https://uploads.tapatalk-cdn.com/201...9e41c4d7b2.jpg

Taped down some sandpaper in the approximate area of the bridge location and started sanding the bottom of the bridge to match the radius of the tophttps://uploads.tapatalk-cdn.com/201...1a95bfb96f.jpg

You can see the slightly darker patches at the tips is where it hasn't touched the sandpaper yet. Almost there https://uploads.tapatalk-cdn.com/201...b02dfe120e.jpg

Sent from my SM-G930F using Tapatalk

Day 9: Part 2
Jumped over to the bobbin sander and roughed out the bridge shape. Maybe a little chunky, but I'm happy with it https://uploads.tapatalk-cdn.com/201...5797d7daef.jpg

Hand sanded through 80, 120, 240, 320, 400 and finally 1200grit. No polish involved, or even wet sanded, this shine is purely from the dry sandpaper!https://uploads.tapatalk-cdn.com/201...44d64c315e.jpg
https://uploads.tapatalk-cdn.com/201...25eb9b116a.jpg

More sanding!
https://uploads.tapatalk-cdn.com/201...3e6710f858.jpg

https://uploads.tapatalk-cdn.com/201...48f0742d3e.jpg

Yep, happy with how that's looking!
https://uploads.tapatalk-cdn.com/201...bb227e56ed.jpg

Sent from my SM-G930F using Tapatalk

Day 9: Part 3
Heel cap sanded flush. Didn't actually intend it, but it's so thin at the front edge, the grain lines almost match up perfectly with the neck heel grain
https://uploads.tapatalk-cdn.com/201...4fab6bb2ab.jpg

More detailed sanding now
https://uploads.tapatalk-cdn.com/201...f4e1ef44eb.jpg

Routing the bridge saddle slot
https://uploads.tapatalk-cdn.com/201...3ea17c875b.jpg

Getting ready to place it
https://uploads.tapatalk-cdn.com/201...033cc0b863.jpg

The tape acts as a dam for the glue, and helps locate it.
https://uploads.tapatalk-cdn.com/201...8886d735d8.jpg

Done!
https://uploads.tapatalk-cdn.com/201...94d0d36b77.jpg

Tomorrow will be final sanding, maybe a couple of areas to fill with some sawdust before applying the first coats of lacquer!!
Bring on the glamour shots!!


Sent from my SM-G930F using Tapatalk

This is looking so good Zand, what was your level of wood working skills before you started?

Also wondering if they use Titebond for all the gluing too?

Quote:

---

Originally Posted by Dedman

This is looking so good Zand, what was your level of wood working skills before you started?

---

Apart from the small amount of work I did on the LP kit first last year, I haven't really done much wood working since leaving high school in 1990! I'm confident with wood, just don't let me anywhere near a welder!!
Aaron has such a great attitude, and his teaching style is tailored to what you want to learn. You want to know specific stuff, he's your man, he'll share pretty much any detail.

Sent from my SM-G930F using Tapatalk

Quote:

---

Originally Posted by wazkelly

Also wondering if they use Titebond for all the gluing too?

---

Yep, titebond original for everything except when using plastic binding which it won't work with. Then he uses super glue. I decided to use the super glue on my wooden binding as well. Super thin super glue is also used in the rosettes occasionally.

Sent from my SM-G930F using Tapatalk

That looka amazimg what an experience

This is such a blast to follow Zandit - it looks amazing

Quote:

---

Originally Posted by JohnH

This is such a blast to follow Zandit - it looks amazing

---

Thank you very muchly John!! The real blast is actually doing it! I'm glad you guys get to share in the journey!!

Sent from my SM-G930F using Tapatalk