Printable View
https://uploads.tapatalk-cdn.com/201...406f02e194.jpghttps://uploads.tapatalk-cdn.com/201...c4e3c84f90.jpghttps://uploads.tapatalk-cdn.com/201...b0fb5eeae2.jpghttps://uploads.tapatalk-cdn.com/201...11560d164b.jpghttps://uploads.tapatalk-cdn.com/201...f462910228.jpghttps://uploads.tapatalk-cdn.com/201...d9ad1312f9.jpg
Sent from my iPhone using Tapatalk
https://uploads.tapatalk-cdn.com/201...809da87cec.jpg
Sent from my iPhone using Tapatalk
Nicely radiused. And now stained almost black.
Position inlay time now? I thought you might have done those before radiusing.
None more black.
https://uploads.tapatalk-cdn.com/201...8cf87e421a.jpghttps://uploads.tapatalk-cdn.com/201...6ec923ab4b.jpghttps://uploads.tapatalk-cdn.com/201...0832e75db2.jpghttps://uploads.tapatalk-cdn.com/201...0d5907c066.jpghttps://uploads.tapatalk-cdn.com/201...7d181fbbf0.jpghttps://uploads.tapatalk-cdn.com/201...c3badfc569.jpghttps://uploads.tapatalk-cdn.com/201...9dcda62fc8.jpg
Sent from my iPad using Tapatalk Pro
Nice work, FW.
Very slick job Frankie.
Dumb question, what do the aluminium blocks do? (Or are they brass?) Is it just to get the p'ups the right height or is there an additional function to them?
It's a variation on a proprietary pickup mounting system that allows you to securely mount a pickup directly to the body of a guitar (the original used a bell-brass block, I don't know what FW's using). The block is mainly there to provide a place to mount the four machine screws that sit under the pickup allowing the height and angle of the pickup to be set, before firmly screwing the two normal (what would be height-adjusting) machine screws into the base-plate to lock the pickup securely onto the guitar body, so that the pickup resonates with the body, and doesn't vibrate slightly on the usual pickup-ring and spring arrangement.