Printable View
You will only need one small tub of Timbermate...
I have a small tub that must be at least five years old now and I haven't used a quarter of it...
As Tony said, a little bit goes a long way.
When you go to use it, thin it down with water until you get a thick cream consistency then use a rubber squeegee or an old credit card to scrape it on.
I apply it across the grain, working both directions to make sure it gets in.
Let it cure over night and sand.
Hey DB, do you sand a bit and then apply timber mate and just put it on straight out of the box?
Me thinks a light sand at least to knock of the usual machining marks and then grain fill but keen to hear you wisdom as I am sure what you have to say will save me heaps of time and effort.
Quote:
Originally Posted by dingobass
No worries and cheers mate so I'll add a squeegee to my shopping list then, will start work on finishing the body on Tuesday this week, or maybe later on this week once I get some time, I'll have to buy some sandpaper from the Big Green Shed while I'm at it so I can get started since I'm going to be doing an order for some PBG Luthier supplies on Tuesday, I'm assuming I'll need to buy sandpaper with grits from something like 180 to 400, will post some pics of the progress with the Ebony Timbermate.
Hopefully my local Bunnings shop has Ebony Timbermate in stock otherwise I might have to order some which may take some time, looks like my build may get off to a slow start and my build diary will be an epic one...lol.
I guess as the saying goes..."Slow and steady wins the race", I'm sure ShazzRandom is going to be finished with her build long before me, but that's totally okay, means I'll most likely end up with good results.
Quote:
Originally Posted by wazkelly
I checked out a video on youtube about applying Timbermate to wood, the guy in the video applied the Timbermate straight onto the wood after thinning it down to the consistency of a thickshake with water, next the guy let the Timbermate dry and then sanded it down.
Hey guys, don't stress this too much. You've described the right process: sand, mix timbermate with water, spread on the guitar, wait, sand.
I've put a few photos of the process on my STA1M build diary: http://www.buildyourownguitar.com.au...ll=1#post87787
Yep, wot Fred sed :)Quote:
Originally Posted by wazkelly
Sand out the worst of the machining marks, say up to 220 then apply the Timbermate.
Quote:
Originally Posted by dingobass
No worries, I'm just making absolutely sure that I know what to do once I've got what I need to start work on finishing the body and neck, tomorrow I'll go get the Ebony Timbermate from the Big Green Shed and a few other things I'll need, but the shopping for the PBG Luthier supplies will come first.
@ Dingobass How are things coming along with the Dingotone MkII?, looking forward to doing the beta testing.
Update:
Seeing as I had successfully completed the mock build, I decided to go ahead and drill the holes for the mounting screws for the tuners in the headstock, I noticed that other forum members have experienced screw breakages but I got lucky and didn't have any breakages, I didn't have any candlewax that I could use as a lubricant on the screws but I did have some pieces of bathroom soap, and as I've heard that you can use soap as a lubricant on the screws I thought I would give it a try, it seemed to work well, you just scrape the screw on the soap and get some in the threads, then you use a screwdriver as usual, the screw should go smoothly into the hole with no binding that would cause breakages, I used a 1.5mm Titanium-coated drill bit to drill the holes.
Reason for drilling the holes?, I wanted to check the alignment of the neck relative to the bridge, seems to look okay to me.
good stuff Doc. DB said I could pick up the DT mark II yesterday so he should be ready to post it off soon. Does he have your postal address Doc ?
Quote:
Originally Posted by wokkaboy
He probably doesn't but if he wants I can pm him and give him my postal address with no problems, that's great news about the Dingotone MkII by the way.
I just got myself back online after experiencing a long NBN outage that's affected alot of people here in Darwin.
ok Doc, sounds like NBN has been a big pain in the butt !