-
WHOOPS!!!! At least your signature is true!!!
-
"Whoops" wasn't one of the many words uttered at the time.... but it sums it up perfectly :)
-
And DB, where's my custom LP?????
Check your emails as well DB, there's a special Wudtone mix for you that I am typing very shortly
-
well done DB on the fix, looks the same as I saw the fingerboard lastnight, there's always a work around !
I bet a few loud word were muttered in the DB man cave when the chunk of ebony went flying !
-
I have the footage from my secret spy-cam if anyone is interested.....
-
-
Now that drama is sorted out, time to cut the nut slot.
I clamp my trusty neck caul to give me a square edge- all these years and I still cant cut straight 8O ..
http://pitbullguitars.com/wp-content...r-IMG_1768.JPG
Set the depth gauge on fret saw.
http://pitbullguitars.com/wp-content...5-IMG_1769.JPG
Cut the slot!
http://pitbullguitars.com/wp-content...v-IMG_1770.JPG
-
Now for the fun bit! Sharp chisel and a mallet 8-)
http://pitbullguitars.com/wp-content...z-IMG_1771.JPG
After giving it a few taps, the waste comes out easily leaving a groove with a messy bottom..
http://pitbullguitars.com/wp-content...3-IMG_1772.JPG
The way to fix this is to attack it with a 1/4" nut slotting file :D
http://pitbullguitars.com/wp-content...6-IMG_1773.JPG
-
-
