On the plus side I can confirm that that kit is super solid.
It could be “re done” a few times and not show any wear.
Sent from my iPhone using Tapatalk
Printable View
On the plus side I can confirm that that kit is super solid.
It could be “re done” a few times and not show any wear.
Sent from my iPhone using Tapatalk
Cheers for the moral boost fellas. My main problem from the start with this one was that I was basically being a bit of a bull at a gate so to speak and not taking my time to think through the processes properly.
The plan is still very similar but im going to use the tru oil on the top this time around instead of the DT colorless. I still have a bit of sanding to do at this point. It took a fair bit of effort to take the clear off the top. Even after a few weeks it was still not cured under the clear as was pointed out in an earlier post.
You just wait 'til you get to the China shop...Quote:
Originally Posted by Grubsta
Been there a few times.
cheers, Mark.
I finished the 2nd round of sanding today and decided to start on the top with Tru-oil, 2 coats on so far.https://uploads.tapatalk-cdn.com/201...2f6b0924c9.jpghttps://uploads.tapatalk-cdn.com/201...fef34aeb6c.jpghttps://uploads.tapatalk-cdn.com/201...97ebe2682e.jpg
Back from the dead looking better than before!
Sent from my iPhone using Tapatalk
lookin good Grubsta
On my phone it looks like the glue lines are not as prominent.
Sent from my SM-A520F using Tapatalk
Yeah there not as bad. I did a lot of sanding and tried using goof off which worked a little but not as well as I hoped unfortunately there is still traces of the glue lines. But I'm happier this time around with it.Quote:
Originally Posted by wazkelly
3rd coat on and it really is looking nicer this time around.https://uploads.tapatalk-cdn.com/201...010366f9e5.jpg
Almost a goldtop without the gold!