Haha, I wish!Quote:
Originally Posted by Simon Barden
We are moving at high pace this week, just so we can take the pressure off next week and not stress about finishing on time!
Sent from my SM-G930F using Tapatalk
Printable View
Haha, I wish!Quote:
Originally Posted by Simon Barden
We are moving at high pace this week, just so we can take the pressure off next week and not stress about finishing on time!
Sent from my SM-G930F using Tapatalk
Day 2: Part 1
Selected my soundboard timber. Yes, I know, it was supposed to be blackwood but that involves splitting up back and side sets, additional cost and the other selections didn't really do it for me in the end. I ended up selecting a nicely coloured set of Silver Quandong, an Australian native timber becoming more and more popular among guitar builders.
https://uploads.tapatalk-cdn.com/201...4d6d875dbe.jpg
Then I started shaping my back braces
https://uploads.tapatalk-cdn.com/201...4d1d40307a.jpg
https://uploads.tapatalk-cdn.com/201...1738f6172a.jpg
https://uploads.tapatalk-cdn.com/201...c456417e87.jpg
https://uploads.tapatalk-cdn.com/201...6891da2662.jpg
Sent from my SM-G930F using Tapatalk
Day 2 continued (this 5 photos per post is annoying!!)
Part 2
Then it was time to workout! This pedestal locks the mold in place so it is perfectly centered on the steel post. A radiused dish filled with 80 grit sandpaper attached is placed over the post and you rotate back and forth until the end blocks and sides are fully sanded to a 15' radius.
https://uploads.tapatalk-cdn.com/201...27caeb91f6.jpg
We then glue and clamp in mahogany kerfling along the edges
https://uploads.tapatalk-cdn.com/201...5b5f39686c.jpg
Both sides are done on the back side, it is then re-radiused and then flipped and repeated on the other side
https://uploads.tapatalk-cdn.com/201...166bdfe65a.jpg
Nice and clean, even if I do say so myself!
https://uploads.tapatalk-cdn.com/201...1e56667c57.jpg
Just a little bit hot in the workshop today. Temperature is not too much of an issue, but humidity is critical, not just now while we are building, but for the life of the guitar. It may not seem hot to the locals, but I've just come from weather that tops out at 13 degs C!!!
https://uploads.tapatalk-cdn.com/201...c412f2cc11.jpg
Sent from my SM-G930F using Tapatalk
Please spare us the shots in your budgie smugglers due to feeling the heat and needing a dip to cool down.
Day 3: Part 1
Rosette day! Again, this is also slightly different from my original plans, but that's the beauty of this process. Having said that, this was an idea I had in my stockpile, and Aaron was more than happy to run with it, as it hasn't been done before in his class.
Glued two pieces of blackwood together.
https://uploads.tapatalk-cdn.com/201...b1eb73ae37.jpg
Using a dremel, I routed a shallow channel and inlayed some blackwhite/black purfling using black dyed super glue.
https://uploads.tapatalk-cdn.com/201...eb3d34ff60.jpg
Scraped this flat then cut out the remainder of the rosette, placing it on the sound board to check it out
https://uploads.tapatalk-cdn.com/201...1948dba279.jpg
https://uploads.tapatalk-cdn.com/201...9ed81dabfe.jpg
Routed out the channel for the rosette then enlarged it ever so slightly to insert more b/w/b purfling as a final border
This is a dry run first.
https://uploads.tapatalk-cdn.com/201...44d34ce7ba.jpg
Sent from my SM-G930F using Tapatalk
You sure??!![emoji23]Quote:
Originally Posted by wazkelly
Sent from my SM-G930F using Tapatalk
Day 3: Part 2.
A little glue, and we're done!
https://uploads.tapatalk-cdn.com/201...18cc571f9b.jpg
This is looking magic!!
https://uploads.tapatalk-cdn.com/201...9c3d6c6a3a.jpg
We then cut in some slots into our sides to accommodate the back braces and glued the back on.
https://uploads.tapatalk-cdn.com/201...9970f8109f.jpg
https://uploads.tapatalk-cdn.com/201...5137a7acf5.jpg
That's day 3 done. Tomorrow I will thickness my top, cut out the sound hole, and start doing my braces for the top. I may get the top glued on tomorrow.
Sent from my SM-G930F using Tapatalk
Just wondering if there is any truth in the myth that most Tasmanians don't know how to swim as the water down there is always too damn cold?
Making good progress at a cracking pace too.
Some bonus shots, we have a local keeping an eye on us. Must be a mate of Deddy's!
https://uploads.tapatalk-cdn.com/201...a0865ebfbb.jpg
And some shots of the workshop
https://uploads.tapatalk-cdn.com/201...2a9a8ad2e0.jpg
https://uploads.tapatalk-cdn.com/201...4f37db7caa.jpg
https://uploads.tapatalk-cdn.com/201...a6d1025d82.jpg
https://uploads.tapatalk-cdn.com/201...97fa8fea2f.jpg
Sent from my SM-G930F using Tapatalk
I can swim, I just choose not to!!Quote:
Originally Posted by wazkelly
Sent from my SM-G930F using Tapatalk