The sanding job looks fine to me. Yes you will use a fair bit of it if you are doing a really thorough job, thats normal
Printable View
Ok ! I had a little fear ! :D
I can't advance on the kit today, tonight and tomorrow, because I'm at my girlfriend's home and I must also finish my school projects (I am in a very time-consuming and demanding computer school). I'm already sick about that! haha
I think I finished sanding the first layer, I went to the 320 paper, even if it is not very useful! haha
I will apply the second layer, with a scraper this time to avoid putting too much! ^^
https://i.imgur.com/iOf9usd.jpg
https://i.imgur.com/WpiEYC9.jpg
https://i.imgur.com/iKEJOJU.jpg
Second putty layer !
this time I used a metal spatula and a plastic scraper to avoid putting too much! :)
https://i.imgur.com/qOb9T3k.jpg
https://i.imgur.com/yKgRCyZ.jpg
I think I’ll won a lot of time ! :D
I finished sanding the second layer of filler!
I think I now have a pretty smooth rendering and I will be able to start putting the primer!
What do you think about that ?
https://i.imgur.com/xdpBehz.jpg
https://i.imgur.com/kjkGuIn.jpg
https://i.imgur.com/0O1S9DK.jpg
https://i.imgur.com/BOU68sV.jpg
It looks pretty good however it is a little hard to be 100% sure just looking at the pictures. Dust it of and just inspect the whole body for anything you may have missed if your satisfied with how it looks then yes move on to the next step.
Looking good.
Yep, i’ll clean it tommorow evening and start to put some primer ! :)
Here's the first layer of primer in the back !
The newt will be in two hours , but I don't know how much layer I need to put ! haha
https://i.imgur.com/S4yk31W.jpg
https://i.imgur.com/IKfJPII.jpg
https://i.imgur.com/LkcCbHu.jpg
https://i.imgur.com/3rdGqeG.jpg
https://i.imgur.com/5BnUNDd.jpg
So, do you know the grade of sandpaper i'll need to use after putting all layers ?
and the number of layers I need to put