Pinball Wizard

It might be (way) out there, Max ... and it certainly is unique!

... but only one word really springs to mind ... WOW!

Super Cool? - Absolutely!

I don't know what else to ad man except you crazy bastard you . Only a man walking the line of genius and mental could come up with such an amazing thing. Holy crap!!!!!!

I suppose this is a silly question, but is there a pickup there somewhere?

there are not the right words for this - it's just too clever, too amazing and too cool

Appreciating the comments & feedback from you guys - thanks again.

@ FW: Single bridge HB fitted in the clear acrylic cap with a clear surround (see pic)
Red arrows show the bridge post holes & the "potholes" for vol/tone control.
Ally rails & lockdown bar still need finish & buffing before fitting up.

@ PP: At this stage I'm still trying to find a fake lightweight silver ball of the right dia.
Real balls are solid steel - thus too heavy.

@ JC: Can't decide on wether to do side art stencil work yet. Worried it might look
a bit too busy with all the other stuff going on?





http://www.pitbullguitars.com/wp-con...38-Cap-001.JPG

You should (my opinion) using white as one of three colours like these:
http://www.pitbullguitars.com/wp-con...2-DSCF1958.JPG
http://www.pitbullguitars.com/wp-con...l_2009_003.jpg
http://www.pitbullguitars.com/wp-con...27-wizard1.jpg

You should (my opinion) using white as one of three colours like these:

Good idea JC it's under consideration . . .

Anyhow, here's what may be the last progress report before Adam does the video with all the flashing lights & bells & whistles etc.

Pic 1. More wiring - Green arrow #1 is an under cabinet switch to isolate the lighting system.
" " #2 is I/O for the effects module to its left (actuates by START button)
" " #3 is I/O for overdrive in amp (actuates by flipper button)

Pic 2. Effects module control panel in situ.
Pic 4. 9 VDC inlet & standard mono outlet panel in situ.



Continued ....................




http://www.pitbullguitars.com/wp-con...wiring-004.JPG
http://www.pitbullguitars.com/wp-con...wiring-006.JPG
http://www.pitbullguitars.com/wp-con...wiring-007.JPG

Pic 4. Close up the front end w/- shooter etc.
Pic 5. Long shafted 500K pots fitted in apron (tone/vol)
Pic 6. Insurance: apron is ally so I bunged on some fibre insulation under the tags.








http://www.pitbullguitars.com/wp-con...wiring-011.JPG
http://www.pitbullguitars.com/wp-con...wiring-013.JPG
http://www.pitbullguitars.com/wp-con...wiring-019.JPG

wow Max that is totally off the chain, are most of these parts actually off a pinball machine ?
I can't wait to see the finished product and the video now, hope this gets posted all over PBG facebook page although its not a Pitbull build it is so out there !

[embed]http://www.youtube.com/watch?v=h3BNz-zKOKM[/embed]