Gluing the shim in. I don't have an after picture. It didn't come out perfectly but I think it will work well. It just shifted a tiny bit so it wasn't flush against the back of the pickup cavity.
Attachment 27526
Printable View
Gluing the shim in. I don't have an after picture. It didn't come out perfectly but I think it will work well. It just shifted a tiny bit so it wasn't flush against the back of the pickup cavity.
Attachment 27526
And now time for gluing the neck. I sure hope I did this right.
Attachment 27527
Attachment 27528
Looks good, give it 24 hours or so and then see what thee hast wrought! Great work so far, keep it going.
Looks good to me! As you haven't located the bridge yet, the tiniest side movement of the neck can be corrected with bridge placement anyway.
Well poop, I ordered some Wilkinson tuners but they are too big for the headstock. Guess they will be going back.
Attachment 27547
On a positive note the neck joint is dry and I filled the gaps with timber mate. I just need to stain it then I'll be ready for some tru oil.
Attachment 27548
Attachment 27549
That 's lookin' the biz.
Can I tru oil or wipe on poly over this blackwood fingerboard? I like how Rickenbacker does there's but I'm not sure how it will work with this particular fingerboard.
That is what I would do on any of these fake rosewood fret boards, irrespective as to whether Ric shape or not as most build diaries so far indicate a rather poor quality surface that may not look too good over time.
Sent from my SM-A520F using Tapatalk
I’ve Tru Oiled over my Blackwood fret board assuming that it will give it some lasting protection. I’m certainly not the first one to of done it. As it’s something new to everyone here we seem to be Learning as we go.Quote:
Originally Posted by BJMtz