http://www.youtube.com/watch?v=slCMkvEfK_U
Printable View
Yes, done that many times before. But you'll then need to cut the slot again.
I wired the LEDs today:
https://vimeo.com/197363785
Now need to find how to customise the trem cavity cover to accommodate the controller...
You've put in some brilliant work, has to be one of the most unique and personal outcomes I've seen.
That is really neat what a nicely themed guitar
Sent from Android Nougat
Looks fantastic Fred!!
Now to do a contrasting Darth Vader model!! Or maybe even a tribal looking Red and Black Darth Maul version!!
Guitar you have built Hmm? Play it you will, Yes? Strong you are with the Force, great is your power!
I had an R2 quote, but can't use that kind of language as it was completely bleeped out by the film censors.
Looks superb with the LEDs!
Got the controller sorted.
I shortened the trem plate by 10mm or so as it was too long and sitting on the Star Wars logo at the back, rounded the edges off and drilled 2 new screw holes, then drilled a 25mm hole in the middle:
http://uploads.tapatalk-cdn.com/2016...cff9b17f91.jpg
And glued the round controller in place. All soldered and tested now:
http://uploads.tapatalk-cdn.com/2016...be644aa408.jpg
Just have to screw in place and take photos!
The awesome is strong with this one.