Can anyone tell me if the J Bass kit bridge pickup cutout is the same as a Fender American Standard or is it the same as the neck pickup as per Mexican? Or is it altogether different?
Printable View
Can anyone tell me if the J Bass kit bridge pickup cutout is the same as a Fender American Standard or is it the same as the neck pickup as per Mexican? Or is it altogether different?
Hi Micky, I would say the bridge pup route would be similar but might need some small mods depending where the mounting nibs are on the pup. I fairly recently built a JBA-4 and installed Tonerider pups and had to slightly modify the bridge pup route.
Cool, thanks. Have an SD Qtr Pound coming for the bridge and panicked. Nothing a dremel won't fix?
yeah Micky, with any luck it will slot in, but I used a round file to widen the nibs or a dremel will be fine
Hey Micky I had the same dilemma with Tonerider pups see this thread where I used Lino carving tools to adjust the pup route
Jb4-m
https://r.tapatalk.com/shareLink?sha...8&share_type=t
Sent from my iPhone using Tapatalk