Wokka's Johnny Ramone Mosrite build

G'day all, this has been my slowest build ever, started July 2014 ! Thought it was time to pull my finger out and polish and assemble it. I probably started a build diary ages ago but easier to start a new one. Spent about 3 hours yesterday with micro mesh pads and polishing and fret levelling and steel wooliing the fingerboard. Found a 12k ohm single Seymour Duncan pup for the bridge and the stock neck mini bucker is over 10k ohm. Left the plastic on the pickguard as I have to turn it over and complete the wiring. Neck had no play in the pocket and strings and TOM fittings lined up well. Think I have to drop the nut slots as the strings don't touch the zero fret yet. Here's some pics from assembly lastnight

here's some pics of the headstock, glued blackheart sassafras veneer to it. Hope to finish the wiring this arvo and make some noise !

looking good Woks.

Hey! Ho! Its all go! Looking schmick Wokka.

That is sooooo looking awesome Wokka, are you planning on doing a demo once it is all up and running mate?

Better late than never Woks, great job I'm interested to see how this sounds with the SD bridge pup

Sent from my Moto G4 Plus using Tapatalk

Love the veneer to the headstock Wokks, nice work

At least the finish will certainly have hardened by now so it should polish up really nicely! 1-2-3-4D!

nice one Wokka, simple and clean

cheers guys. Got it wired up and assembled. Needs some tweaks . Demo to come doc once it's playing well. I'll post some pics soon