Pickup rings without screws?

I am going to need to make some custom pickup rings... Has anyone ever figured out a way to install pickup rings without using visible screws? Would look nicer...if possible.

There are a few ways to do this.
Easiest is to glue the rings in place.
Second way is to counter bore the screw holes and then use a plug cut from the same material.
Or you can get really funky and use rare earth magnets :)

Screw from the back?

Quote:

---

Originally Posted by Muzza

Screw from the back?

---

That would work on hollow bodies, might have to experiment with that idea :)

Quote:

---

Originally Posted by Muzza

Screw from the back?

---

This is the Danelectro solution. Danos with the lipstick pickups are front mounted, but the adjustment screws are on the back of the guitar.
http://www.vintagesilvertones.com/gu...lefthanded.jpg

Oh yeah, forgot all about the Danos with rear height adjust pups..

Quote:

---

Originally Posted by Fretworn

This is the Danelectro solution. Danos with the lipstick pickups are front mounted, but the adjustment screws are on the back of the guitar.
http://www.vintagesilvertones.com/gu...lefthanded.jpg

---

Hey thats my 56U2 but i have a different colour ;)

I thought about the screw from the back approach. At one point I thought I'd have to put a hole in the back anyway. Since I figured out how not to do that I am reluctant to do that.

I am intrigued with the magnet approach. I have seen it used on backside control covers. Would using them so close to the pickup covers cause a problem with the magnetic fields?

Sent from my SAMSUNG-SM-N900A using Tapatalk

Yes they would create havoc with the pickups.

I was afraid of that...

Sent from my SAMSUNG-SM-N900A using Tapatalk