G'day, started another new project last weekend, here's the body after sanding
http://www.pitbullguitars.com/wp-con...7-17.02.36.jpg
http://www.pitbullguitars.com/wp-con...7-17.05.16.jpg
http://www.pitbullguitars.com/wp-con...7-17.05.46.jpg
Printable View
G'day, started another new project last weekend, here's the body after sanding
http://www.pitbullguitars.com/wp-con...7-17.02.36.jpg
http://www.pitbullguitars.com/wp-con...7-17.05.16.jpg
http://www.pitbullguitars.com/wp-con...7-17.05.46.jpg
here's the first stain coat, on the back FW jarrah and cedar, on the front a triple burst, from centre DT Coolangatta gold, FW cedar and FW jarrah
http://www.pitbullguitars.com/wp-con...7-18.33.33.jpg
http://www.pitbullguitars.com/wp-con...7-18.33.07.jpg
here's the 2nd stain coat, got a bit more blending to do of the burst. Hope to glue a veneer to the headstock today but as usual got a million other projects on !
http://www.pitbullguitars.com/wp-con...3-23.55.40.jpg
http://www.pitbullguitars.com/wp-con...3-23.56.27.jpg
http://www.pitbullguitars.com/wp-con...3-23.57.57.jpg
Damn... that figure on top!!! (and the back for that matter) You just can't beat nature's artwork, stunning!
cheers Barge, I just glued think its red myrtle veneer to the headstock so the colour is deep red with nice dark grain so I'll post some pics later once its shaped and cleaned up
King of the bursts!
Looks friggin awesome!
Sweet grain there Woks
cheers fellas.
Got the veneer glued to the headstock and shaping done. Think its red myrtle but believe it or not this is the colour of it, I haven't stained it. Lost a nick out of the top side near the tuners while I was sanding so I've glued in a small piece and hope it stays there !
http://www.pitbullguitars.com/wp-con...4-17.19.12.jpg
http://www.pitbullguitars.com/wp-con...4-17.19.31.jpg
http://www.pitbullguitars.com/wp-con...17.21.11-1.jpg
looking good Wokka
cheers Tony