-
Here is my ES-2V, finished in Cherry ColorTone dye and Tru-oil. I've changed just about everything on this beauty with new components and all gold-hardware:
Wilkinson Gold EZI-lock Tuners
GFS Dream 180 Humbuckers
Gold pickup surrounds
Gold ABR-1 tune-o-matic bridge
Gold 335-style trapeze tailpiece
Gold strap studs.
Gold oval jack plate
CTS pots,
Orange Drop caps,
Vintage shielded cloth covered wire,
Switchcraft 3-way and output jack.
DIY custom truss-rod cover
DIY bone nut
I have also swapped out all the electronics, wiring her using a 50s vintage wiring scheme with the independent volume mod.
cheers,
Gav.
http://www.pitbullguitars.com/wp-con...03/cw7io-1.JPG
http://www.pitbullguitars.com/wp-con...3/7ml19-10.JPG
http://www.pitbullguitars.com/wp-con...3/494ed-14.JPG
-
-
3 Attachment(s)
Not as good as Gavs, but here is my ES-2V
Front finished with Wudtone Carmine Gypsy and Black Magic Woman mix with BMW burst, back and sides BMW with gloss Wudtone
Stock kit plus
Bigsby B70
Bigsby bridge
vintage wiring, orange caps, tone circuit mod
chrome switch tip and radio nut
black pup surrounds
tortoise shell pickguard and truss cover
Attachment 1286Attachment 1287Attachment 1288
-
3 Attachment(s)
-
QUOTE=neverwas;67833]More
Attachment 1289Attachment 1290Attachment 1291
WOW! That's the exact colour I've been looking for!
Could you please PLEASE give us a tutorial on how you achieved that tobacco burst? I've found Carmine Gypsy and Black Magic Woman on the Wudtone site, but I have no idea how to even start.
And what do you mean by "mix with BMW burst"?
-
1 Attachment(s)
Many upgrades. Duesenburg tuners and knobs , GF Retrosonic pick ups,ebony fret board and bridge base, Finger style tail piece with reversed fingers Hell guitars tuner washers,switch plate and truss rod cover. my own stainless steel headstock inlays.
Attachment 19699
