Here we go… down the rabbit hole.
http://pitbullguitars.com/wp-content...923_165252.jpg
Printable View
Here we go… down the rabbit hole.
http://pitbullguitars.com/wp-content...923_165252.jpg
Was a little worried a couple days in when on return from work I found a curing check… but the PBG 'spurts (and my research) all say with good timber filler it'll sound fine… so onwards! Decided on a blonde to auburn sunburst (I may add more edge darkness later - we'll see) cos I am loving the grain and the light catching of the ripples in the grain.
Was a little worried a couple days in when on return from work I found a curing check… but the PBG 'spurts (and my research) all say with good timber filler it'll sound fine… so onwards! Decided on a blonde to auburn sunburst (I may add more edge darkness later - we'll see) cos I am loving the grain and the light catching of the ripples in the grain.
http://pitbullguitars.com/wp-content...002_080137.jpg
and further - now the sunburst is becoming more defined
http://pitbullguitars.com/wp-content...0-19.35.10.jpg
http://pitbullguitars.com/wp-content...0-19.35.59.jpg
And is getting richer and deeper with each layer of stain..
http://pitbullguitars.com/wp-content...112_191314.jpg
http://pitbullguitars.com/wp-content...112_191458.jpg
And here's at the end of today's brief session...
http://pitbullguitars.com/wp-content...112_193629.jpg
Hi WestsacGreen, looking good, did you end up filling the cracks on the bottom side before wudtoning ?
Are you planning to cut the headstock shape before you get more coats on the neck/headstock ?
I'd recommend steel wooling the binding between coats will make it easier to clean up the binding.
Sunburst is coming along and love your hanging system on the bike handlebars !
Looking good indeed. Like Wokka asks, how did you go with the cracks?
colour looks great!!