Printable View
Hi every one I am Nick,
I am doing a ST-1 and need a wire diagram, I am looking for a wire diagram for a humbucker in the bridge position and two single coil middle and neck for a ST-1, I would like to use a coil split with a push pull pot to make the humbucker single coil or as usual twin coil, can you please give me some options.
Mant thanks
Nick.
Try this one:
http://deaf-eddie.net/tdpri-drawings/hss-cs-series.jpg
Alternatively do a search for HSS wiring diagrams and look for the bits and pieces you are looking for - there's heaps out there :).
'Nuther one:
http://www.seymourduncan.com/support...2s_1v_2t_5w_pp
PS - welcome along Nick... Hope the ST-1's great for you..
Hi Nick, welcome to the forum.
There are a few options available, depending on which pickups and pots you are using. Here's three variations:
Seymour Duncan HSS, 1 Vol, 2 Tone, 5 way, Push Pull
Guitar Electronics.com HSS with auto coil split
DiMarzio HSS, push pull split bridge
Hope that helps.
(Ah Brendan, you type too fast)
Welcome Nick, can recommend the seymour duncan site
Welcome to the PBG clan Nick
Welcome Nick! Sounds like a sweet project. Keep us up to date with your progress!
Cheers,
Gavin.