Printable View
I just found this site and thought I should share. If you want to make your own pickguard here is where you will find the templates you need.
http://www.terrapinisland.com/pdfFiles.html
Print one out at full size (not fit to page)and stick it to a blank or whatever it is you are using with spray adhesive. I am using Coreldraw to plot out a DXF file and cut acrylic with my laser cutter. Sort of cheating, I know.
I hope this helps.
Excellent find! Thanks for sharing.
Perfect timing! I was planning on trying to make a pickguard this afternoon. Thanks Pablo!
Be aware, some of these will need a bit of push and pull to get perfect. My first attempt had holes over cavities and the outline was a bit out.
Thats why its a good idea to cut a mm or two to refine the shape!
Damn, now I wish I had a laser cutter...
*nods* Yep, was just going to use them as a starting point to create a custom fit paper template for this specific build before I start hacking away at the acrylic.
Got a spare $100k floating about?Quote:
Quote from keloooe on April 11, 2013, 11:36
Damn, now I wish I had a laser cutter...
I doubt a school boy could raise that much Pablo,Quote:
Quote from pablopepper on April 11, 2013, 12:33
Got a spare $100k floating about?Quote:
Quote from keloooe on April 11, 2013, 11:36
Damn, now I wish I had a laser cutter...
is that what your laser cutter is worth ?
Uhh... I'll check 8O :D , yep!!!! 8-) ;)
That's about what we paid for it. It's getting a bit long in the tooth now.Quote:
Quote from wokkaboy on April 11, 2013, 13:08
is that what your laser cutter is worth ?