The easy way or the hard way.
These are the two options open to you.
Me, I choose the easy way. The photo says it all.
http://pitbullguitars.com/wp-content...n-IMG_1364.JPG
Printable View
The easy way or the hard way.
These are the two options open to you.
Me, I choose the easy way. The photo says it all.
http://pitbullguitars.com/wp-content...n-IMG_1364.JPG
Seems to be a ton easier if you upgrade a Les Paul with a B70!Quote:
Quote from dingobass on February 17, 2013, 10:42
The easy way or the hard way.
These are the two options open to you.
Me, I choose the easy way. The photo says it all.
http://pitbullguitars.com/wp-content...n-IMG_1364.JPG
Hi Dingobass, I wish I had seen this yesterday........
incidentally, my trem arm was disassembled, can you advise the correct sequence for the steel and fabric washers and the nut on the trem arm please.
Hey Pedro, the photo shows the sequence.
From memory there is another fibre washer, which I think I may have misplaced.... If you have a spare it goes under the spring on the main body frame.
http://www.pitbullguitars.com/wp-con...z0u8-image.jpg
ah ...brilliant thanks, I had the two fabric washers on this side of the arm, Cheers mate....
Also I don't have the circlip, hence the reason it fell apart, easily fixed. Cheers.
Sorry to dig up this old thread... but I'm curious as to where you found that trem? I'm looking for one, not necessarily a bigsby... but perhaps a knock off version that would suit a left handed build. Any ideas where I might look?
realparts.com carry the licensed copies and the real ones, or try evil bay for a real cheapy