Fretboard Inlays lifting

I noticed the other day that the trapezoid fretboard inlays on my SSCM-1 (which was completed in 2021) had started lifting up. All of them from the 3rd to the 12th fret!:mad:

Has anyone else had this experience?

Reading online it looks like a relatively common issue!

Anyway, I followed the method suggested by the Stewmac video:
https://www.stewmac.com/video-and-id...etboard-inlay/

Add thin CA glue in the loose edges, cover with wax-paper, clamp using a capo.
Once dry, then use a razor blade as a scraper to tidy up the glue marks and get a flat surface.
Re-oil the board.

I think it was very successful!:)

I haven't had it, but my new bass neck has square inlays that might be susceptible . Good trick to know!