Here we are, my DIY guitar kit has arrived, and now things are getting serious, I don't remember what is the exact model but it's the Ibanez-like with the cool leaves on the neck. Hope I'm not gonna ruined everything and it will go well 👍
Printable View
Here we are, my DIY guitar kit has arrived, and now things are getting serious, I don't remember what is the exact model but it's the Ibanez-like with the cool leaves on the neck. Hope I'm not gonna ruined everything and it will go well 👍
Welcome! The model would be the SV-1, they are a great kit to build.
Thanks you ! Yeah it's the right model, I chose it because it look reallllllllllly cool and it was one of the easiest build because a lot of things are already wired and this kind of things. I started some hours ago and I am really taking my time, I'm not an English speaker so the instructions are a bit hard to understand with all the technical words, and also I'm only 15 years old so I'm not really comfortable with crafting and buildings things that requires precision and special techniques. I'll be asking some questions probably very soon :)
Good for you. 👍
Ask as many questions as you need, the only silly question, is the one you don’t ask before you try something that goes horribly wrong.Quote:
Originally Posted by Vald3ums
The experienced builders and those who have done the kit you have will happily lend answers and advice for your build. This forum is very supportive and instructive, all present like to help especially to less experienced builders.
one piece of advice you will get is Sand, sand, sand and then when you think you have sanded enough, sand some more!
For your kit, the big trouble spot is usually the hand hold or “Monkey Grip” at the top of the body. This takes much patience and some similar sized sanding cauls to get rid of any machine marks.
best of luck for your build!
Welcome Vald3ums
Hi and welcome.
By the way, thanks a lot for the welcoming and support 👍
Ok, so I had to do a bit of sanding on the neck to make it fit in the body. I went to the point where you need to tie the both E strings. Because this is a Floyd Rose, I had to watch a few videos but I managed to do it.
I hope I haven't spoil the strings but for the time being, everything went well, I guess 😂.
I would love to upload photos but didn't find how to do it 🤔.
Welcome to the forum and good luck with your build.