Just spotted this on YouTube and was compelled to share it.....
http://youtu.be/k-63xsQqR7w
Printable View
Just spotted this on YouTube and was compelled to share it.....
http://youtu.be/k-63xsQqR7w
https://uploads.tapatalk-cdn.com/202...51f1b5a78f.jpg
After much thought, I opted to go with brushed nickel on this guitar. Had it made to order from diamond cut graphics on eBay. Jeff was most helpful. Albeit pricey than most, I’m happy with the end product.
Sent from my iPhone using Tapatalk
Thank you Wazkelly. That’s the kind simple I need. I’ll be filling that one away in my memory bank.
What I would like next is a technique to remove the film and just leave the toner to lacquer over...
Some techniques you may or may not already of seen. The acetone method looks simple.Quote:
Originally Posted by JimC
https://youtu.be/xHOWUR8vTvo
Acetone will react with quite a lot of finishes (definitely nitro), so I'd suggest only using it directly on wood. Or at least first use a test piece of wood that you've treated with the same finish.