PDA

View Full Version : Finishing the fretboard?



ashaer16
27-06-2019, 02:54 AM
Are you supposed to apply finish to the fretboard?

McCreed
27-06-2019, 06:49 AM
Short answer: Maple - yes. Rosewood/Ebony etc - no.

With dark dense woods (rosewood/ebony etc) they are left unfinished (meaning no lacquer or poly) but periodically treated with a conditioning oil such as lemon oil or similar.

There are some (I'd dare say a *very* small minority) that leave maple unfinished and condition it with oil the same way, but this is not widely recommended. Especially not by aftermarket manufacturers (like Warmoth) that won't warranty a maple neck if it's only been oil treated.

FWIW re: lemon oil, these oils main component is mineral oil. You can use straight mineral oil on a rosewood fretboard for conditioning, it just won't smell "lemony" ;)