View Full Version : Duck Dunn P Base
stuzl873213
28-10-2017, 04:59 PM
Considering a Duck Dunn P Base (red of course) as my next project.
Heard that some of his basses had a V neck profile as opposed to a C profile.
Anyone ever seen a V neck profile?
Fretworn
29-10-2017, 04:24 AM
A V neck profile isn't uncommon. You can achieve it from a kit with some 80 grit and some elbow grease.
http://mycoolguitars.com/wp-content/gallery/misc-images/guitar-neck-contours.jpg
If you aren't used to it, I'd go with a soft V rather than a hard V.
dave.king1
29-10-2017, 05:15 AM
I seem to remember my L Series PBass as having an oval C profile, could be wrong because it was sold over 40 years ago
Fretworn
29-10-2017, 02:29 PM
I once got to play an early 20th Century Gibson acoustic that had a triangular neck profile ie no curves but flat sides coming to an apex down the spine of the neck. Imagine a hard V if they didn't round off the back at all. It was almost unplayable for someone like me who prefers soft C profiles.
Bass Guy
29-10-2017, 05:57 PM
Are you aiming to tribute Duck's 58 with maple board, or when he switched the neck to a rosewood Jazz neck?
stuzl873213
30-10-2017, 02:31 AM
I think I will go for the original configuration Red 66 P Bass before it acquired the JB neck when it was repaired because the original was bowed.
Bass Guy
05-11-2017, 06:23 AM
https://m.facebook.com/story.php?story_fbid=10155073439750665&id=53089680664
stuzl873213
12-11-2017, 02:50 AM
https://m.facebook.com/story.php?story_fbid=10155073439750665&id=53089680664
Wonder what that is worth?
Sent from my iPhone using Tapatalk
Powered by vBulletin® Version 4.2.4 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.